Simviation Forums

Good morning all...

Just notice this:

FSX Default Flight from Friday Harbour

The Marina with the two red Float aircraft right next to the Ferry Dock are perfect.

However the Marina on the other side of the Ferry Dock the boats are all elevated...never noticed this before.

Please tell me there is a fix for this or do I have to clear this computer of anything FSX and start over.

REX is not on so that is not the problem I don't think.

Doug...........Look something like this?


In my FSX I have the addons UTX-USA and FTX-PNW which include the Friday Harbour area. I believe you have them also.

Hi Dave
Thanks and that is exactly what it looks like...
First:
FTX Central shows up at bottom of my screen and when I click on it I can barely read anything...how do I make that larger?
Second:
FTX Central
Properties
General.... Compatibility.... Security.... Details.... Previous Versions
No Tool in any of them...
Third:
FSX Library
1-FTXAA_ORBXLIBX
2-FTX_NA_PFJ05_SCENERY
3-FTX_NA_PFJ06_CVX
4-FTX_NA_PFJ07_MESH
5-FTX_NA_PFJ08_CUSTOM
6-FTX_NA_PNW05_SCENERY
7-FTX_NA_PNW06_CVX
8-FTX_NA_PNW07_MESH
9-FTX_NA_PNW08_CUSTOM
10-UT FSX WATERCLASS
11-UT FSX OBJECT REPOSITIONING
12-UT CANADA GROUND POLYGONS
13-UT CANADA STREAMS
14-UT CANADA WATER
15-UT CANADA RAILROADS
16-UT CANADA ROADS
17-UT LANDCLASS-CUSTOM
18-UT LANDCLASS-URBAN
19-UT LANDCLASS-VEGETATION
20-UT CANADA LIGHTING
21-UT EXVLUSIONS FOR DEFAULT SCENERY
22-BEAVERX-PIER 39
23-EDWARDS_AFB.....ETC ETC

Still got the problem...

Hi Dave...

REX ON and FTX Central at bottom of screen

Just did a short hop from Friday Harbour (Default)
and still have the same problem....

This time the FSX did not log the flight...never seen that happen before.

When closing out I got....

Microsoft NetFlix Error...
Just in time...JIT...Debugging Error.... Again....

FTX Central should look like this when you open it. You can use the windows controls in the upper right corner, like any other window, to go to full screen but this won't increase the text size for reading.

Not sure what you mean by 'FTX Central at the bottom of the screen'. Are you referring to a 'shortcut' on the desktop? In any case, FSX must be shut down before running FTX Central.

I see you do not have UTX USA as I thought. Your UTX Canada should not be involved with the 'marina' problem at Friday Harbour. But I still suspect a terrain or mesh conflict is causing the problem. Do you have any other terrain or mesh addons installed that include this area? (These could include terrain or mesh addons or scenery addons that have their own terrain or mesh components.) If so, try temporarily disabling the addons in the Scenery Libray and see if that fixes the problem.

If you could post a screenshot from the same perspective as mine it might help.

I don't think the 'marina' problem has anything to do with the other problems your having.

When closing out I got....

Microsoft NetFlix Error...
Just in time...JIT...Debugging Error.... Again....

I'm guessing you meant a 'Microsoft .net' error. Many programs, including REX, require the 'Microsoft .net framework'. I can't give any advice on this except to use Windows Update the ensure you have the latest updates for .net.

Don't have a clue about the Logbook problem, I never use it.

Dave

After thought: Open the......\\ORBX\User Documents\Versions\FTX_NA_PNW.txt file. If the version listed is less than ... V1.0 PATCH 005... you can download the patch here-http://fullterrain.com/support.html. Don't know that it will fix this problem, but provides many fixes and enhancements to the original release.

Good afternoon Dave and All...

Well Dave just before I comment there is something I would like to say about young folks...

As our children and grandchildren are quite far away our neighbours grandson (12 years old) heard about my problem with not getting FTX Central to come up large on my screen.

I was complaining about FSX....Windows 7 the other night at cards so our neighbour asked his grandson when they were here for Mothers Day.

The lad showed up to-day as he had early lunch.

I have to learn when I move a screen from my main monitor to my second monitor to bring it back prior to closing....

Well you all know I would have figured it out in a year or so...

Still no ideas on what could cause this problem folks?...

This is surely a simple scenery glitch, I think.
These floating boats are in fact a single object, one big 3D model that shows several boats as well as the harbor structures. If this object placement is incorrect, then the whole harbor and all the boats will look incorrect, because it's just one plain object.

What are your current scenery display settings Doug ? (in the game options, for the mesh complexity and the mesh resolution)

Good morning Stephane...

Sorry to get back so late to you...yesterday we were out Float Flying...

Terrain & Water

-Level of Detail Radius:         Large
-Mesh Complexity:               100
-Mesh Resoulution:               1M
-Texture Resoulution:           7M
-Water Effects:                     High 2.X

-Land Detail Textures:           On
-Scenery Complexity:            Dense
-Autogen Density:                 Normal

-Ground Shadow Sceneries:   On

-Special Effects Details:         High


Global Options:

-Global Texture resolution:     Very High

-Advanced Animations:           On

Still using the Profile Settings you sent and all works great except for this one location....

Hi Doug,

Don't worry about the answer details. This is a forum, not a chat  (also, you know I'm pretty often late to answer too )

1 meter for the mesh resolution is a bit high, you're simply increasing the load times.
Keep it at 5 meters minimum, that will be just fine for the OrbX sceneries.
However, I don't think this will solve the issue.

By the way, speaking of PNW, have you installed the PNW SP5 patch already ?

Hi Stephane...

No...did not know there was a patch.

I just bought this so thought it would be up to date but will do a search and an installation.

Will change my Mesh Resolution to "5".

It is a Long Holiday Weekend here "May 24th Victoria Day" and we are off to the Flying Club as soon as the ladies come home from church.

Lots of flying going on this weekend...

By the way, speaking of PNW, have you installed the PNW SP5 patch already ?

No...did not know there was a patch.

Doug, maybe you missed my 'After thought' edit earlier:

After thought: Open the......\\ORBX\User Documents\Versions\FTX_NA_PNW.txt file. If the version listed is less than ... V1.0 PATCH 005... you can download the patch here-http://fullterrain.com/support.html. Don't know that it will fix this problem, but provides many fixes and enhancements to the original release.

(You can also check the version in FTX Central under Tools>Reports>FTX Products Installed.)

Thanks Dave...much appreciated...

Okay...just a quick thank you before we head off to the bug smasher field...

Set the Mesh Resolution to 5...

Downloaded and installed PNW SP5 patch...

Quick FSX Friday Harbour test flight...

All is now OK....

Thanks guys...