Simviation Forums

Sorry again guys. I am a pain in the bum

Are you sure these doors can be opened on the default 737 ?

Default 737-800 can only open Bagage-doors and Front passenger door.

he must joking

Alex.

It is the default 737-800 just a different paint. I don't use default paints. I snapped some paints on the default 737-800.

The wingtip you are referring too is indeed there.

It is just white and the ENB faints it.

Look at this picture. This picture is the default 737-800 without the VC 2 update. The only change is the paint added.






Raoul.: The default 737-800 CAN open ALL doors.

I suggest you load a pure default 737 and open all doors.

Also if you refer to the entry points for [Exits] in the default 737-800 aircraft .cfg you will see it opens all doors as in the picture.

wait what?

that definaly has to be another model ,I'm going to check it out I also have the original files ,maybe [[EXITS]] has to be add it,but I doubt ,Ill be back

Alex.

It is the default 737-800 just a different paint. I don't use default paints. I snapped some paints on the default 737-800.

The wingtip you are referring too is indeed there.

It is just white and the ENB faints it.

Look at this picture. This picture is the default 737-800 without the VC 2 update. The only change is the paint added.

Mouse. What is the key command for that rear door? I tried the unmodified default 737 & can't open it. :-?

[size=16][b] I'm so sure that no one knew this until now

[quote][size=16][b] I'm so sure that no one knew this until now

[glow=yellow,2,300] Holy $ht!! [/glow]






.

Alex.

It is the default 737-800 just a different paint. I don't use default paints. I snapped some paints on the default 737-800.

The wingtip you are referring too is indeed there.

It is just white and the ENB faints it.

Look at this picture. This picture is the default 737-800 without the VC 2 update. The only change is the paint added.

Mouse. What is the key command for that rear door? I tried the unmodified default 737 & can't open it. :-?

SHIFT+E opens the main door.

SHIFT+E+2 opens the cargo door.

SHIFT+E+3 Opens the back pax door and both service doors.

That is the 3 entry points in the default 737-800 cfg under [Exits].

I once again confirm this is the very standard cfg, only difference is paints.


^^^ so I am right?

Alex.

It is the default 737-800 just a different paint. I don't use default paints. I snapped some paints on the default 737-800.

The wingtip you are referring too is indeed there.

It is just white and the ENB faints it.

Look at this picture. This picture is the default 737-800 without the VC 2 update. The only change is the paint added.

Mouse. What is the key command for that rear door? I tried the unmodified default 737 & can't open it. :-?

SHIFT+E opens the main door.

SHIFT+E+2 opens the cargo door.

SHIFT+E+3 Opens the back pax door and both service doors.

That is the 3 entry points in the default 737-800 cfg under [Exits].

I once again confirm this is the very standard cfg, only difference is paints.


^^^ so I am right?

Check Alex's last two posts. Change the Aircraft.cfg Exits entry.

Alex.

It is the default 737-800 just a different paint. I don't use default paints. I snapped some paints on the default 737-800.

The wingtip you are referring too is indeed there.

It is just white and the ENB faints it.

Look at this picture. This picture is the default 737-800 without the VC 2 update. The only change is the paint added.

Mouse. What is the key command for that rear door? I tried the unmodified default 737 & can't open it. :-?

SHIFT+E opens the main door.

SHIFT+E+2 opens the cargo door.

SHIFT+E+3 Opens the back pax door and both service doors.

That is the 3 entry points in the default 737-800 cfg under [Exits].

I once again confirm this is the very standard cfg, only difference is paints.

wait!!HOLD ON THE PRINTERS ,THERE SOMETHING HAS TO BE WRITTEN THIS IS NOT A COMMON DISCOVERY THE AIRPLANES OF FSX DID NOT OPEN THOSE DOORS UNTIL NOW

YOU NEED TO OPEN THE AIRCRAFT.CFG AND IN

[exits]
number_of_exits = 2 HAS TO BE REPLACE IT BY "4"
LIKE THIS

[exits]
number_of_exits = 4

The Million Dollar Question:
Why did no one find this out before???,and why did Microsoft didn't allow it to do this

.

Geeeee,,, Ollie, I do believe you just made some Flight Sim History here now ~ !

wait!!HOLD ON THE PRINTERS ,THERE SOMETHING HAS TO BE WRITTEN THIS IS NOT A COMMON DISCOVERY THE AIRPLANES OF FSX DID NOT OPEN THOSE DOORS UNTIL NOW

YOU NEED TO OPEN THE AIRCRAFT.CFG AND IN

[exits]
number_of_exits = 2 HAS TO BE REPLACE IT BY "4"
LIKE THIS

[exits]
number_of_exits = 4

I believe 3 will do it.

My unmodified Aircraft.cfg