Page 1 of 1
is it possible have 2 jets at one airport use both to land &take off
Posted:
Sun Feb 13, 2011 3:34 pmby bombardier
hello:
as I fly in fsx going to different airports(national and international) as I land at one airport it is too bad that once you land and save and then come back with a different jet and fly to the same airport and when you land you will see your other jet on the tarmac near the gate and then change to the other jet and take off to another destination. is that possible.
bombardier
Re: is it possible have 2 jets at one airport use both to land &take off
Posted:
Mon Feb 14, 2011 7:18 amby EVVFCX
Hi,
A simple way would be to create two flights or more as needed.
Create and save a flight starting at the your landing airport using the other jet you wish to take off with.
You start with one flight, take off and land then load the second flight.
regards
Steve.
Re: is it possible have 2 jets at one airport use both to land &take off
Posted:
Mon Feb 14, 2011 6:54 pmby bombardier
ok this is what I did using the aeromexico jet I plan a flight from abraham rodrigus internation and plan a fight plan to lax I then saved with the aeromex . I then opened the same fight planand saved I thought the quantos and saved again but it overwrite the aeromexico session. well I goofed that up. after reading your answer I did create a flight plan;I did save it with the jet on the tarmac at the departure airport. I have read your answer so many times oh I'm suppose to put a jet at the landing spot? the only thing that will do is to overwrite the original jet aromexico.
I know its an easy answer but I must be missing something sorry if I do not under stand I'm trying to figure this out. I
Re: is it possible have 2 jets at one airport use both to land &take off
Posted:
Mon Feb 14, 2011 10:32 pmby DaveSims
Short answer, it is not possible to change aircraft in FSX and see your other aircraft still on the ramp.
Re: is it possible have 2 jets at one airport use both to land &take off
Posted:
Tue Feb 15, 2011 7:33 amby EVVFCX
Hi Bombardier.
For example:
your second flight is LA to san francisco
your starting flight is chicago to LA
Create a flight with the aircraft of your choice positioned at the gates at LA and save this flight. Create flight plan for this flight to san francicso and save it.
Start a flight from chicago to LA, after parking at LA load the LA to KSFO flight.
As davysims says, you can't do it.
You could create a static aircraft (with the SDK) of your choice so you could see it but you will not be able to start from that same gate for your second flight.
regards
Steve