Simviation Forums

Can someone help me about fixing radio frequencies on aircraft. I have 3 aircraft that I have added to the FSX sim. Everything appears as it should and everything is functional except the radios. Upon clicking the radio icon on the panel the radios appear as they should. The frequencies show and are lighted but they cannot be changed. This problem is on 2 of the aircraft. The third aircraft the radios appear as they should when the icon is selected but there are no frequencies showing and the radios are completely dark as if they are off.

I have copied the radio section from other aircraft cfg. files and replaced that portion in the questionable aircraft with no luck.
IE.....
[Radios]
// Radio Type = availiable, standby frequency, has glide slope
Audio.1 = 1
Com.1 = 1,1
Com.2 = 1, 1
Nav.1 = 1, 1, 1
Nav.2 = 1, 1, 0
Adf.1 = 1
Transponder.1 = 1
Marker.1 = 1
Although the questionable aircraft already had the above radio sections in their cfg's so I'm at a loss as to what to do next. Any help will be greatly appreciated.

The planes and radios are as follows::::

1. simTech FSX Beech 18 Bendix/King
2. I-FOX Piper Navajo Panther Bendix/King
3. FSND Cessna 310Q with Bendix/King Radios

Thanks

CV21

Make sure the master-avionics switch is  ON

Check to make sure your avionics switch is on, and of course your battery switch as well.

You might also have to modify the panel.cfg,
If you got the basic Bendix-King Radio stack,
You should see something like this be in the panel.cfg,


[Window Titles]
Window00=Main Panel
[glow=yellow,2,300]Window01=Radio Stack[/glow]<-----[You might have to add this, if you do, you should put it on the bottom of this list, and change Window[glow=yellow,2,300]01[/glow] to the next corresponding number.]
Window02=GPS
Window03=Annunciator
Window04=Compass
Window05=Mini Panel