Page 1 of 1
How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Mon Nov 02, 2009 12:58 pm
by Tech Diver
I know that using Shift+Enter I can raise my eye. However, I hate having to do so every time I get in the cockpit of a 737. Is there is file I can edit that will set this? I looked at aircraft.cfg but did not see the pilot seat view. Any help would be appreciated.
Peter
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Mon Nov 02, 2009 1:07 pm
by BFMF
If you look in the aircraft CFG file and find the Views header, there is an Eyepoint variable with set of coordinates. Try adjusting those numbers one by one to see which is what.
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Mon Nov 02, 2009 1:34 pm
by Tech Diver
Awesome! I changed the third varable from 1.9 to 2.0 and it did the trick. Thanks!!!
Peter
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Tue Nov 03, 2009 9:22 pm
by grizzard
Ohh ... neat. Now in my JS4100 (and in most of my planes) I would like the 1st view in VC not to be 10" in front of the dash .. I always have to zoom backwards. Can I change my eyepoint to reflect this? My config looks like this: eyepoint = 21.051,-1.21,3.44 I'm assuming that to be two settings but not sure which numbers to change ... :-/
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Tue Nov 03, 2009 10:27 pm
by Capt.Propwash
start with 1 set of numbers (WRITE DOWN THE ORIGINAL NUMBERS FOR SAFE KEEPING that way you can go back to them later if you get too far from what they were).... go up 5 numbers 1 increment at a time, then back down 5 from the original number.
go to the next set, and do the same.
3rd set same.
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Wed Nov 04, 2009 12:09 am
by Fr. Bill
[quote]Can I change my eyepoint to reflect this?
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Wed Nov 04, 2009 2:16 am
by JoBee
[quote][quote]eyepoint = 21.051,-1.21,3.44
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Wed Nov 04, 2009 5:30 am
by Fozzer
...a very useful tip...
..saves piling Cushions on the Seat before each flight!..

...!
Paul....

...!
(Saved the details in Notepad, for reference).
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Wed Nov 04, 2009 6:47 pm
by B_7772
Does any one know the set standard for how much you would need to add to the eyepoints coordinates to raise the seat once, or move it to the left, ect.
Basically, Shift + Enter = .10.
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Wed Nov 04, 2009 11:47 pm
by Fr. Bill
[quote][quote][quote]eyepoint = 21.051,-1.21,3.44
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Thu Nov 05, 2009 3:28 pm
by Tech Diver
BoeingGuy, each Shift+Enter is about 0.5 feet (more or less).
Peter
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Thu Nov 05, 2009 4:12 pm
by B_7772
BoeingGuy, each Shift+Enter is about 0.5 feet (more or less).
Peter
Thanks,
And just to be clear, do you mean 0.50 or 0.05?
Also, does the same aply for Ctrl + Shift + Backspace, ect.
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Thu Nov 05, 2009 4:23 pm
by Fr. Bill
0.5 feet or 6 inches
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Thu Nov 05, 2009 4:56 pm
by Tech Diver
Yes, 6 inches.
Re: How do I permanently set my view slightly higher in 737 virtual cockpit?

Posted:
Fri Nov 06, 2009 8:35 am
by grizzard
Thanks guys ..... I think I've got it now. If I've got it right the first set of numbers on my JS4100 will adjust front to rear, but for my Cheyenne it was the 3rd set. Seems odd they would be different, but .... that's what my scrnprints show. I'll reaffirm when I fly a little more ....