Page 1 of 2

B727-200 problem

PostPosted: Thu Jul 02, 2009 9:54 pm
by manesag
My beautiful Boeing 727-200 from Alrot has a little problem with the engines. When you run up the engines for takeoff the game pauses for a little for like 5 seconds then it continues to run up. And when you dont do anything it is too heavy to takeoff at Honolulu International Airport you will start at runway 4L or 4R if you are heavy. To rotate you will need to get to 250 knots or else you cant get into the air AKA CRASH

Re: B727-200 problem

PostPosted: Fri Jul 03, 2009 8:41 am
by Brett_Henderson
The pause during spool-up spunds like a computer issue..

I just took that 707 to Honolulu International, myself..

Runway 04L is not even 7000' long, though that is certainly enough for a 707 to get airborne, even fully loaded. I'd be using the longer runways

Re: B727-200 problem

PostPosted: Fri Jul 03, 2009 9:09 am
by Alejandro Rhodes

I just took that 707 to Honolulu International, myself..



Brett Alias Chief he saids the 727  ::)
He did send me a PM which to be Honest I didn't understand and told him to describe the issue up here so you (chief ) could see it and explain it ,after all you made the flight Dynamics Or all my models Flight Dynamics  :D  

Re: B727-200 problem

PostPosted: Fri Jul 03, 2009 9:57 am
by Brett_Henderson
OOOPS  :D :-[ :-[ :-[ :-[

Ok.. I'll go test the 727 now  8-)


(but I already know that it's good   ;) )

Re: B727-200 problem

PostPosted: Fri Jul 03, 2009 10:14 am
by Brett_Henderson
It's good too...  full load.. trimmed for takeoff.. takeoff flaps.. and it climbs out nicely   8-)

Re: B727-200 problem

PostPosted: Fri Jul 03, 2009 11:44 am
by BFMF
Check to make sure the autopilot is off.... ;)

Re: B727-200 problem

PostPosted: Sat Jul 04, 2009 10:16 am
by manesag
Ok the B707 problem is just the engines iI dont really care. Its when am taking off with the B727 i have flaps down 1 or 2 notches down I firewall it (damaging the engines not good) and i need to get to 250 nots before the takeoff roll. Even on the longest runway I fly into the water. To take off i either 1. Firewall the engines for 1 to 2 minutes check N1 and if its high parking brake off run down the runway or 2. Take out all the load except the captain, co pilot and flight engineer  :-/

Re: B727-200 problem

PostPosted: Sat Jul 04, 2009 11:02 am
by Jodedor
Yeah Brett

Re: B727-200 problem

PostPosted: Sat Jul 04, 2009 11:04 am
by ShaneG_old
I can't take off and land in this carrier Why why?? Huh? huh?





You can't take off because you're not hooked up to the catapult.  ::)




;D ;D ;)

Re: B727-200 problem

PostPosted: Sat Jul 04, 2009 11:14 am
by manesag
Yeah you are completly right but how`d u land on the carrier to me u need to slew. or just spawn on it

Re: B727-200 problem

PostPosted: Sat Jul 04, 2009 11:44 am
by Jodedor
[quote]
You can't take off because you're not hooked up to the catapult.

Re: B727-200 problem

PostPosted: Sat Jul 04, 2009 11:51 am
by ShaneG_old
LMFAO!!!!  ;D ;D ;D


When can I download that one! 8-) ;)

Re: B727-200 problem

PostPosted: Sat Jul 04, 2009 12:01 pm
by Alejandro Rhodes
[quote]Ok the B707 problem is just the engines iI dont really care. Its when am taking off with the B727 i have flaps down 1 or 2 notches down I firewall it (damaging the engines not good) and i need to get to 250 nots before the takeoff roll. Even on the longest runway I fly into the water. To take off i either 1. Firewall the engines for 1 to 2 minutes check N1 and if its high parking brake off run down the runway or 2. Take out all the load except the captain, co pilot and flight engineer

Re: B727-200 problem

PostPosted: Sat Jul 04, 2009 1:24 pm
by manesag
Ok I can wait plus thats what I want to do be a Pilot 8)

Re: B727-200 problem

PostPosted: Sat Jul 04, 2009 2:13 pm
by Brett_Henderson
Manesag,,,  I posted that I took off on the 7,000 foot runway, at Honolulu, in the 727.. full load.. no problem  ::)

The only thing I can imagine, is that you are not trimmed for takeff...  I got up and climbing with runway to spare, at ~ 130KIAS.

I'm not sure what I can help with..