Print view
Board index ‹ Current Flight Simulator Series ‹ Flight Simulator X (FSX) and Steam

Very High BufferPools entry

FSX including FSX Steam version.
Post a reply

Very High BufferPools entry

Postby kingfish42 » Sat Mar 21, 2009 5:03 am

I have not seen any postings with suggestions for placing bufferpools as high as mentioned in

http://orbxsystems.com/forums/index.php?topic=9908.0

on this forum.

I tried it and it works for me. i7940 at 4.0 and GTX 285. Smooth flight with most sliders maxed.

Kingfish

:)
kingfish42
Ground hog
Ground hog
 
Posts: 8
Joined: Fri Nov 09, 2007 7:25 am
Top

Re: Very High BufferPools entry

Postby SubZer0 » Sat Mar 21, 2009 8:40 am

Thanks for the heads up on this, kingfish. I'll try it as soon as I get home. I'm smooth already everywhere else, but in FTX areas it's a little rough with all the autogen that thing makes the system render. Very excited about this having read all the positive replies from the i7 users  ;)
[center][img]http://www.simviation.com/phpupload/uploads/1369006030.jpg[/img][/center]
User avatar
SubZer0
Major
Major
 
Posts: 3722
Joined: Fri May 04, 2007 9:29 pm
Location: KLNA
Top

Re: Very High BufferPools entry

Postby yancovitch » Sat Mar 21, 2009 11:04 am

ok...i'm going to as a very stupid question....where are bufferpools located...didn't see them in  my fsx cfg....
i7-7700k ....msi geforce gtx 1060....msi z270 gaming m5 lga 1151 motherboard....CORSAIR Vengeance LPX 16GB (2 x 8GB) ram.....
User avatar
yancovitch
Major
Major
 
Posts: 3530
Joined: Sat Aug 02, 2003 12:48 pm
Location: born montreal, lived vancouver, now live in burns lake bc.
Top

Re: Very High BufferPools entry

Postby SubZer0 » Sat Mar 21, 2009 12:29 pm

[quote]ok...i'm going to as a very stupid question....where are bufferpools located...didn't see them in
[center][img]http://www.simviation.com/phpupload/uploads/1369006030.jpg[/img][/center]
User avatar
SubZer0
Major
Major
 
Posts: 3722
Joined: Fri May 04, 2007 9:29 pm
Location: KLNA
Top

Re: Very High BufferPools entry

Postby NickN » Sat Mar 21, 2009 12:52 pm

They did not come up with that .. they got it from me at AVSIM

http://forums1.avsim.net/index.php?s=&s ... &p=1552743


http://forums1.avsim.net/index.php?s=&s ... &p=1552773

http://forums1.avsim.net/index.php?s=&s ... &p=1554521




Raising bufferpools on 1GB cards to 400-480MB LOWERS the priority to the PCIe slot at the driver level


not all systems have the same response to that however it does require a 1GB video card to accomplish
Last edited by NickN on Sat Mar 21, 2009 12:53 pm, edited 1 time in total.
User avatar
NickN
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 6317
Joined: Mon Sep 05, 2005 12:57 pm
Top

Re: Very High BufferPools entry

Postby SubZer0 » Sat Mar 21, 2009 5:37 pm

They did not come up with that .. they got it from me at AVSIM

http://forums1.avsim.net/index.php?s=&s ... &p=1552743


http://forums1.avsim.net/index.php?s=&s ... &p=1552773

http://forums1.avsim.net/index.php?s=&s ... &p=1554521




Raising bufferpools on 1GB cards to 400-480MB LOWERS the priority to the PCIe slot at the driver level


not all systems have the same response to that however it does require a 1GB video card to accomplish






It's not working as well as I expected it to be for me... If I set it to anything above 270mb, the textures will be completely messed up and misplaced and there will be no autogen showing at all in the game and stutters are unbearable...

If I set it to 250mb, it's very smooth but then there will be autogen cells that are completely blanked out if there are too many trees in one area for example...

If I set it to 200mb... stutters badly.

This is around Launceston, Tasmania with FTX and autogen set to very dense.
[center][img]http://www.simviation.com/phpupload/uploads/1369006030.jpg[/img][/center]
User avatar
SubZer0
Major
Major
 
Posts: 3722
Joined: Fri May 04, 2007 9:29 pm
Location: KLNA
Top

Re: Very High BufferPools entry

Postby RacingLad » Sun Mar 22, 2009 2:56 am

They did not come up with that .. they got it from me at AVSIM

http://forums1.avsim.net/index.php?s=&s ... &p=1552743


http://forums1.avsim.net/index.php?s=&s ... &p=1552773

http://forums1.avsim.net/index.php?s=&s ... &p=1554521




Raising bufferpools on 1GB cards to 400-480MB LOWERS the priority to the PCIe slot at the driver level


not all systems have the same response to that however it does require a 1GB video card to accomplish







Hey Nick,

What advice would you give me with these specs in mind, in terms of Bufferpools and whatnot:


Dual Core E4600 2.4Ghz
2GB RAM
Nvidia GForce 7300 512MB

With the current settings that I have I
Image
RacingLad
2nd Lieutenant
2nd Lieutenant
 
Posts: 181
Joined: Wed Sep 17, 2008 4:53 pm
Location: MMMY
Top

Re: Very High BufferPools entry

Postby NickN » Sun Mar 22, 2009 2:58 am

They did not come up with that .. they got it from me at AVSIM

http://forums1.avsim.net/index.php?s=&s ... &p=1552743


http://forums1.avsim.net/index.php?s=&s ... &p=1552773

http://forums1.avsim.net/index.php?s=&s ... &p=1554521




Raising bufferpools on 1GB cards to 400-480MB LOWERS the priority to the PCIe slot at the driver level


not all systems have the same response to that however it does require a 1GB video card to accomplish







Hey Nick,

What advice would you give me with these specs in mind, in terms of Bufferpools and whatnot:


Dual Core E4600 2.4Ghz
2GB RAM
Nvidia GForce 7300 512MB

With the current settings that I have I
Last edited by NickN on Sun Mar 22, 2009 2:59 am, edited 1 time in total.
User avatar
NickN
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 6317
Joined: Mon Sep 05, 2005 12:57 pm
Top

Re: Very High BufferPools entry

Postby NickN » Sun Mar 22, 2009 3:00 am

They did not come up with that .. they got it from me at AVSIM

http://forums1.avsim.net/index.php?s=&s ... &p=1552743


http://forums1.avsim.net/index.php?s=&s ... &p=1552773

http://forums1.avsim.net/index.php?s=&s ... &p=1554521




Raising bufferpools on 1GB cards to 400-480MB LOWERS the priority to the PCIe slot at the driver level


not all systems have the same response to that however it does require a 1GB video card to accomplish






It's not working as well as I expected it to be for me... If I set it to anything above 270mb, the textures will be completely messed up and misplaced and there will be no autogen showing at all in the game and stutters are unbearable...

If I set it to 250mb, it's very smooth but then there will be autogen cells that are completely blanked out if there are too many trees in one area for example...

If I set it to 200mb... stutters badly.

This is around Launceston, Tasmania with FTX and autogen set to very dense.



as I said its a try and see setting.. i7 systems respond different than Q with that


Most Q's and C2's will benefit from it
User avatar
NickN
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 6317
Joined: Mon Sep 05, 2005 12:57 pm
Top

Re: Very High BufferPools entry

Postby SubZer0 » Sun Mar 22, 2009 11:21 am

They did not come up with that .. they got it from me at AVSIM

http://forums1.avsim.net/index.php?s=&s ... &p=1552743


http://forums1.avsim.net/index.php?s=&s ... &p=1552773

http://forums1.avsim.net/index.php?s=&s ... &p=1554521




Raising bufferpools on 1GB cards to 400-480MB LOWERS the priority to the PCIe slot at the driver level


not all systems have the same response to that however it does require a 1GB video card to accomplish






It's not working as well as I expected it to be for me... If I set it to anything above 270mb, the textures will be completely messed up and misplaced and there will be no autogen showing at all in the game and stutters are unbearable...

If I set it to 250mb, it's very smooth but then there will be autogen cells that are completely blanked out if there are too many trees in one area for example...

If I set it to 200mb... stutters badly.

This is around Launceston, Tasmania with FTX and autogen set to very dense.



as I said its a try and see setting.. i7 systems respond different than Q with that


Most Q's and C2's will benefit from it

Hey Nick,

The reason I'm wondering about this is becuase I see that over on the FTX forums there are i7 users with specs very, VERY similar to mine (if not the same) that are able to push the BP up to 400mill and I can't even go above 260mill... Perhaps a 280/285 would help?
[center][img]http://www.simviation.com/phpupload/uploads/1369006030.jpg[/img][/center]
User avatar
SubZer0
Major
Major
 
Posts: 3722
Joined: Fri May 04, 2007 9:29 pm
Location: KLNA
Top

Re: Very High BufferPools entry

Postby NickN » Mon Mar 23, 2009 1:08 am

you must have a 1GB card to run a 400+ BP
User avatar
NickN
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 6317
Joined: Mon Sep 05, 2005 12:57 pm
Top

Re: Very High BufferPools entry

Postby HarvesteR » Mon Mar 23, 2009 9:34 am

i got a 768MB card here... maybe increasing BP over my current 100MB would help?

Cheers
:D NEW PC SPECS: Intel Core i7 920 - 6GB Corsair DDR3 PC12800 RAM- Intel DX58SO Mobo - Geforce GTX 460 768MB GDDR5 - 3x LG1952h LCDs through Matrox's TH2Go - 640GB Seagate Barracuda 7200Rpm
User avatar
HarvesteR
Captain
Captain
 
Posts: 675
Joined: Wed Aug 16, 2006 8:18 pm
Location: Mexico, DF :D
Top

Re: Very High BufferPools entry

Postby NickN » Mon Mar 23, 2009 11:35 am

i got a 768MB card here... maybe increasing BP over my current 100MB would help?

Cheers




a 768MB card @ 100MB is overrun

70MB is the max with a 768MB card
User avatar
NickN
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 6317
Joined: Mon Sep 05, 2005 12:57 pm
Top
Post a reply

Return to Flight Simulator X (FSX) and Steam

Who is online

Users browsing this forum: No registered users and 706 guests