Simviation Forums

I am using this plane

http://www.simviation.com/simviation/do ... hp?ID=2493

On my main panel i have com1/nav1 in the com2/nav2 location, and my com2/nav2 is missing...



On my right seat panel i have com1/nav1 where it should be and com2/nav2 where it should be...



any suggestions?

Just look a little further to the right!!!!

Seriously,  I have intended to get that plane for a while.  I'm gonna get it now and see how it turns out for me.  I'm pretty sure someone can tell you how to move the guage location.....but not me!

Error in the panel.cfg

//--------------------------------------------------------
[Window00]
file=Panel.bmp
size_mm=1024
window_size_ratio=1.000

thank you very much, half way there, on the left seat the com 1 is below com2, in the right hand seat com 1 is above com 2

how do i switch com 1 and com 2 for the pilots seat view?

i might be able to think it out but id rather get the correct answer instead of making mistakes.

Just switch the 1 and 2 in the gauge names, to look like this:

[Window00]
......................
gauge17=Bendix_King_Radio!Bendix-King Radio Nav-Comm 1,

ok you 99% fixed my favorite plane.

i did all that you said, i even went and stold a nav/gps switch from the 208b caravan and put it up by the marker lights.

now i can fly using the gps too.

the only thing left that i can see is to fix is my speedometer only goes to 220 but the plane flys up to 260. not a problem tho.....for now.
thanks again sir.

hmmm going back at the pics i posted, on the right seat panel there sure is alot of blank space there, i wonder if i could put the right hand side of the garman 1000 panel there.....

i even went and stold a nav/gps switch from the 208b caravan and put it up by the marker lights.

now i can fly using the gps too.

What code did you chang/add?

Looking further....there are several missing gauges as they are from earlier FS versions and thus not included.

The empty right side is supposed to have the HGHB_VM1000, engine monitor display. Best info I can find, this is an add-on FS98 gauge.

Other missing gauges are default gauges from: FS 2002, the Cessna182rg gauges, and the Cessna_182 gauges from FS2002/2004.

Dave

This cockpit does need a lot of work.   The VC has all the radio's, but many things are not mapped.   It would be cool if one of you smart cats could update those gauges, and mapping and let us get our hands on the config!!   8-)

here is the panel.cfg that fixes the com 1 and 2 radio issue i had, and an added gps/nav switch.

i used the nav/gps switch from a cessna 208 cause its close in color and size i think.

i also had to move the Cessna208B_XML.cab file to the guages folded, works great now.

//--------------------------------------------------------
[Window00]
file=Panel.bmp
size_mm=1024
window_size_ratio=1.000  
position=7
visible=1
ident=0

gauge00=Mooney_Bravo!Vertical Speed,  544,345,147,140
gauge01=mooney_bravo!Master Alt Bat,  120,473,34,60
gauge02=mooney_bravo!Avionics Switch,  164,473,34,60
gauge03=Cessna172!Clock,  155,252,79,75
gauge04=extra-300!Starter,  30,475,58,58
gauge05=mooney_bravo!Navigation Lights,  520,493,29,38
gauge06=mooney_bravo!Strobe Lights,  490,493,29,38
gauge07=mooney_bravo!Pitot Heat,  461,493,29,38
gauge08=mooney_bravo!Boost Pump,  432,493,29,38
gauge09=mooney_bravo!Flaps Switch,  924,463,26,37
gauge10=mooney_bravo!Gear Lever,  677,483,24,57
gauge11=mooney_bravo!Gear Light,  632,509,35,14
gauge12=mooney_bravo!Master Caution,  296,179,24,14
gauge13=mooney_bravo!Thrust Controls,  759,475,156,41
gauge14=mooney_bravo!Wing Flap Display,  958,  469 ,36,60
gauge15=Mooney_Bravo!Airspeed,  239,199,140,137
gauge16=bendix_king_radio!Bendix-King Radio Audio,  750,135,245,36
gauge17=bendix_king_radio!Bendix-King Radio Nav-Comm 1,  750,169,245,88
gauge18=bendix_king_radio!Bendix-King Radio Nav-Comm 2,  750,255,245,82
gauge19=bendix_king_radio!Bendix-King Radio Xpndr,  750,336,245,68
gauge20=bendix_king_radio!Bendix-King Radio AP,  750,403,245,62
gauge21=Mooney_Bravo!HSI,  388,347,150,140
gauge22=mooney_bravo!Attitude,  388,196,150,145
gauge23=cessna!Pitch_Trim,  45,402,30,61
gauge24=cessna!DME,  416,148,101,45
gauge25=mooney_bravo!Annunciator,  751,100,243,33
gauge26=mooney_bravo!Elevator Trim Switch,  375,493,29,38
gauge27=mooney_bravo!OMI Lights,  753,85,35,14
gauge28=mooney_bravo!Standby Vac,  403,493,29,38
gauge29=cessna208!ATC-Display-Toggle,  975,83,16,16
gauge30=mooney_bravo!VOR2,  101,339,128,127
gauge31=mooney_bravo!Turn Coordinator,  236,345,147,137
gauge32=mooney_bravo!Altimeter,  545,194,147,140
gauge33=trim_digital,  52,390,15,8
gauge34=mooney_bravo!Speed Brake,  921,498,34,26
gauge35=mooney_bravo!Fuel Flow,  253,490,94,43
gauge36=mooney_bravo!Taxi Lights,  347,493,29,38
gauge37=cessna208!Panel-Lights,  597,506,20,20
gauge38=cessna208!Landing-Lights,  565,506,20,20
gauge39=SimIcons!GPS Icon, 945, 83,16,16
gauge40=SimIcons!Compass Icon, 959, 83,16,16
gauge41=mooney_bravo!Rudder Trim Switch,  203,496,45
gauge42=SimIcons!Kneeboard Icon, 930, 83, 16, 16
gauge43=SimIcons1024!ECU Icon, 915, 83, 16,16
gauge44=Cessna208B_XML!switch_nav_gps, 727, 90, 22, 45

//--------------------------------------------------------