Guages Missing

[Flying Trucker]

Hi all...

I downloaded the "Volpar" Beechcraft 18 from Nor-Cal Prop Club on page 33 of the Simviation Download Section along with several other aircraft.

The Flight Guages are not showing in the Main Cockpit of the Volpar however they all work and show in the Virtual Cockpit.
I downloaded the Volpar twice to see if the download was a problem.
Everything else looks just fine and seems to work as well.

The Amphibian Maule from page 34 is wonderful and works great.

Cheers...Happy Landings...Doug

[ShaneG_old]

Try this one: http://www.freewebs.com/wreckerman/radialpropplanes.htm

I just grabbed them both to check them out. This link goes to their site.

[Flying Trucker]

Thanks Shane shall have a go at it.  

Cheers...Happy Landings...Doug

[Flying Trucker]

Hi Shane...

Made no difference.

Maybe some of these aircraft downloads only have the instruments in the Virtual Cockpit Mode?

Cheers...Happy Landings...Doug

[Hagar]

Maybe some of these aircraft downloads only have the instruments in the Virtual Cockpit Mode?

Cheers...Happy Landings...Doug

Hi Doug. This is Brian Gladden's original FS9 model "updated"* for FSX. After a peek at the Panel.cfg I suspect you need to paste copies of some of the FS9 default gauges into the FSX\Gauges folder. Try Cessna182rg.gau & Cessna208.gau to start with.

*I use the word updated in its loosest sense.

[Boikat]

I had the same thing, so I swapped in default gauges from FSX aircraft into the "window00" section:

*****************

gauge00=b18_airspeed!b18_airspeed,  206,416,100,100
gauge01=b18g_3_combo!b18g_3_combo,  848,311,100,100
gauge02=b18g_dual_MP!b18g_dual_MP,  539,311,100,100
gauge03=b18g_dual_tach!b18g_dual_tach,  642,311,100,100
gauge04=b18g_cyl_temp!b18g_cyl_temp,  951,311,100,100
gauge05=b18g_R_engine3_combo!b18g_R_engine3_combo,  745,311,100,100
gauge06=Cessna!Altimeter,  448,416,100,101
gauge07=KingAir!Attitude,  326,416,100,100
gauge08=Cessna182rg!Clock,  121,490,70,69
gauge09=Cessna!Turn_Indicator,  206,534,100,99
gauge10=Cessna!Vertical_Speed,  448,534,100,100
gauge11=Cessna!Heading_Indicator,  322,534,110,104
gauge12=ST_D18!Rad_Compass_D18,  448,647,100,100
gauge13=ST_D18!oat,  115,665,70,69
gauge14=ST_D18!RMI_D18,  205,  647 ,100,100
gauge15=Cessna208!DME,  325,644,100,50
gauge16=Kingair_Radio!Adf,  929,632,88,96
gauge17=Kingair_Radio!Com1,  650,424,88,95
gauge18=Kingair_Radio!Com2,  929,424,88,95
gauge19=Kingair_Radio!Nav1,  650,527,88,95
gauge20=Kingair_Radio!Nav2,  929,527,88,95
gauge21=Kingair_Radio!Xpndr,  650,632,88,96
gauge22=Bendix_King_Radio!Bendix-King Radio Audio,  744,426,178,35
gauge23=Bendix_King_Radio!Bendix-King Radio AP,  744,461,178,55
gauge24=OMI_Bendix_KR22!OMI_Bendix_KR22,  327,375,100,34
gauge25=SimIcons!ATC Icon,  372,336,19,19
gauge26=SimIcons!Avionics Icon,  431,336,19,19
gauge27=SimIcons!ECU Icon,  411,336,19,19
gauge28=SimIcons!GPS Icon,  470,336,19,19
gauge29=SimIcons!Kneeboard Icon,  391,336,19,19
gauge30=SimIcons!Map Icon,  451,336,19,19
gauge31=Robinson_R22!compass_popup,  845,0,90,92
gauge32=Beech_Baron!Left Fuel Quantity,  744,689,69,69
gauge33=Beech_Baron!Right Fuel Quantity,  851,689,69,69
gauge34=Extra-300!Nav GPS Switch,  432,375,22,35
gauge35=cad_kln90bro!gpsro,  745,518,178,57
gauge36=Beech_Baron!Pitch Trim,  600,652,40,110
gauge37=,  562,552,63
gauge38=PITOT!PITOT,  112,576,36
gauge39=PROPICE!PROPICE,  147,576,36

***************************************

Okay, the digital ADI (attitude) is out of place, but it's better than nothing.  

Hmm, looking at it, I must have messed up "gauge37."  Ah well, must not have been important.....  

[Flying Trucker]

Thanks folks will try that and see if they work.  

Cheers...Happy Landings...Doug