Page 1 of 1

Default Nav 1 setting

PostPosted: Thu Apr 03, 2008 3:56 pm
by alb469
Is there any way to change the default freq. setting from 113.7 to one thats closer to most ils freqs. Its a small nuisance when you always have to change down.FS9 had the right idea its default was 110.3.

Re: Default Nav 1 setting

PostPosted: Thu Apr 03, 2008 4:06 pm
by Brett_Henderson
Set it to whatever you like, and then save that as the default flight.

Re: Default Nav 1 setting

PostPosted: Thu Apr 03, 2008 7:43 pm
by BFMF
You consider tuning the radio a nuisance...? ::)

dude, what do you expect, an autotune feature for the nav radios also? ::)

Re: Default Nav 1 setting

PostPosted: Fri Apr 04, 2008 11:25 am
by Fr. Bill
You consider tuning the radio a nuisance...? ::)

dude, what do you expect, an autotune feature for the nav radios also? ::)


Well, there is one - sort of...

VOR Frequencies
  • Open the GPS and switch to the Nearest VOR page.
  • Press the small, inner knob to enable the cursor.
  • Use the large outer knob to move the cursor to your desired VOR
  • Click the "Enter" button to autotune the NAV1 standby freq.

ILS Frequencies
  • Open the GPS and switch to the Nearest Airport page.
  • Press the small, inner knob to enable the cursor.
  • Use the large outer knob to scroll the cursor to your desired Airport.
  • Click the "Enter" button to select the Airport.
  • Switch to the Airport page.
  • Use the large, outer knob to select the 3rd Airport page containing the available com and nav frequencies.
  • Enable the cursor.
  • Scroll down the list to your desired navaid frequency
  • Press the "Enter" button to auto-tune the nav1 standby frequency.

Re: Default Nav 1 setting

PostPosted: Fri Apr 04, 2008 12:28 pm
by Slotback
I keep it at 110.30. It makes it easier when flying into Seattle.  ;)