Aryus Works Citation Excel

FSX including FSX Steam version.

Aryus Works Citation Excel

Postby Hawkeye07 » Fri Mar 22, 2019 6:14 pm

Does anyone else have these problems? Is there a fix I didn't find in my searching the boards?

1. Nose wheel only turns to the left. The aircraft itself will turn to the right but the nose wheel stays centered.

2. Ailerons both move in the same direction. Left turn - they both go up, right turn, they both go down for a second and then slap back to neutral.

Beautiful looking aircraft but these problems really take away from the overall enthusiasm to fly them.

Note! these aircraft are the FSX native aircraft package with extra pop-up extras in VC. (Posted Feb 24, 2019 09:48 by Jetranger)

I had downloaded this one quite a while ago ( way before Jetranger posted them) and I had the same trouble back then.

THE Aryus Works Sovereign doesn't have these problem and is a superb flyer. I hope to get the Excel working as well.
Image

An Aircraft Mechanic only needs two tools, Duct Tape and WD40.
If it moves and it's not supposed to - use the Duct Tape.
If it doesn't move and it's supposed to - use the WD40.

Intel(R) i5 CPU 750 @ 2.67GHz, P55M-UD4, GeForce GTX960 8.00 GB RAM, Windows 7 Ultimate (32 bit & 64 bit on separate HDs)
User avatar
Hawkeye07
Major
Major
 
Posts: 1229
Joined: Sun Dec 02, 2012 7:10 pm
Location: Landlocked in the Midwest USA at KAXN

Re: Aryus Works Citation Excel

Postby A Hobbit » Sat Mar 23, 2019 1:00 pm

I had this trouble a few years ago with another aircraft. Try downloading it again, but with no other programs running and the same for install. Recently had to break my rule about firewall safety to download an aircraft....scary shyte that is...goodluck
A Hobbit
2nd Lieutenant
2nd Lieutenant
 
Posts: 54
Joined: Wed Oct 10, 2018 2:03 pm

Re: Aryus Works Citation Excel

Postby Hagar » Sun Mar 24, 2019 5:32 am

The animation on this one works for me. https://simviation.com/1/search?submit=1&keywords=Aryus_C560_NJE_CS-DXU.zip&categoryId=

Image

Image

Note it's an FS9 model with no VC.
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Picasa gallery
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 34779
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica

Re: Aryus Works Citation Excel

Postby Hawkeye07 » Sun Mar 24, 2019 11:20 pm

Hi Hagar! Thanks for reminding me of the original FS9 version. It has its problems too although smaller than the FSX versions. Just the flashing hinge points which bug me less then the NWS
and the aileron problems on the FSX version. Oh well, it is what it is. A hellova lot better than I could ever do.
FS9 Version
Image
FSX Turning right
Image
FSX Left Bank
Image
FSX Right Bank
Image
Image

An Aircraft Mechanic only needs two tools, Duct Tape and WD40.
If it moves and it's not supposed to - use the Duct Tape.
If it doesn't move and it's supposed to - use the WD40.

Intel(R) i5 CPU 750 @ 2.67GHz, P55M-UD4, GeForce GTX960 8.00 GB RAM, Windows 7 Ultimate (32 bit & 64 bit on separate HDs)
User avatar
Hawkeye07
Major
Major
 
Posts: 1229
Joined: Sun Dec 02, 2012 7:10 pm
Location: Landlocked in the Midwest USA at KAXN

Re: Aryus Works Citation Excel

Postby fcerven » Mon Mar 25, 2019 3:15 pm

Since we are talking about the Ayrus Citation, It also has problems with landing lights. You can add all the landing lights in the aircraft config and they show up. Unfortunately, they do not light up the ground ahead of you. I think it is a model oversight.

hopefully these things can be corrected to give us a really nice personal jet.
fcerven
Ground hog
Ground hog
 
Posts: 10
Joined: Fri May 13, 2011 5:01 pm

Re: Aryus Works Citation Excel

Postby garymbuska » Tue Mar 26, 2019 10:46 am

fcerven wrote:Since we are talking about the Ayrus Citation, It also has problems with landing lights. You can add all the landing lights in the aircraft config and they show up. Unfortunately, they do not light up the ground ahead of you. I think it is a model oversight.

hopefully these things can be corrected to give us a really nice personal jet.


You are 100% correct the splash from landing lights is part of the model file and can only be fixed by the original creator as you have to have the original file in order to solve the problem.
One word of caution this is not a simple task as you have to define the light from a given point to a given point get it wrong and you could see light coming from any where except from where it is supposed to.
8-)
just another reason why I do not mess with things like this and my hat goes off to the people who design all of these aircraft.
8-) <<r
Gary M Buska
SYSTEM Specs ASUS P8Z68 V/GEN 3 mother board: INTELL I7 2600k 3.48 ghz Quad core CPU with Sandy bridge: 12 Gigs of 1800hz ram:
GTX 950 OVER CLOCKED: 2 Gigs Ram Windows 10 Home 64 bit Operating system. 750W Dedicated modular power supply. Two Internal 1TB hard drives 1 External 1TB 3.2 USB hard drive. SAITEK Cessna flight Yoke with throttles.
CH Rudder Peddles 27 inch Wide screen Monitor
User avatar
garymbuska
Major
Major
 
Posts: 4400
Joined: Tue Dec 30, 2003 11:10 am
Location: Jacksonville, Florida

Re: Aryus Works Citation Excel

Postby SLAMMAN » Wed Apr 24, 2019 11:15 am

IS this BLOODY THING FSX OR FS9 when you open it NOTATION READS FS9
MODEL :? :?:
SLAMMAN
Ground hog
Ground hog
 
Posts: 25
Joined: Fri Apr 13, 2018 2:48 pm

Re: Aryus Works Citation Excel

Postby Hawkeye07 » Wed Apr 24, 2019 1:15 pm

SLAMMAN wrote:IS this BLOODY THING FSX OR FS9 when you open it NOTATION READS FS9
MODEL :? :?:


Please re-read the opening comment. It will explain it.

I've noticed since I first opened this subject that the FSX version of the "Aryus C680_NJA_N372QS Sovereign" file has the same problem as the Excel. :(
Image

An Aircraft Mechanic only needs two tools, Duct Tape and WD40.
If it moves and it's not supposed to - use the Duct Tape.
If it doesn't move and it's supposed to - use the WD40.

Intel(R) i5 CPU 750 @ 2.67GHz, P55M-UD4, GeForce GTX960 8.00 GB RAM, Windows 7 Ultimate (32 bit & 64 bit on separate HDs)
User avatar
Hawkeye07
Major
Major
 
Posts: 1229
Joined: Sun Dec 02, 2012 7:10 pm
Location: Landlocked in the Midwest USA at KAXN

Re: Aryus Works Citation Excel

Postby cevans » Wed Apr 24, 2019 3:01 pm

SLAMMAN wrote:IS this BLOODY THING FSX OR FS9 when you open it NOTATION READS FS9
MODEL :? :?:


FS2004 models can work fine in FSX provided they have the right panel (internal model if VC required) and sounds. It won't work in P3D4 (all I use) but I might take a look at this out of interest.
cevans
2nd Lieutenant
2nd Lieutenant
 
Posts: 166
Joined: Tue Dec 22, 2015 3:27 pm

Re: Aryus Works Citation Excel

Postby Nighthawk117 » Wed Apr 24, 2019 4:31 pm

I have a citation XLS+ not sure what file it was. I downloaded it here but i think everything worked correctly on it. I will look tonight
Image
User avatar
Nighthawk117
2nd Lieutenant
2nd Lieutenant
 
Posts: 227
Joined: Thu Jan 18, 2018 6:26 pm
Location: Oxford New York

Re: Aryus Works Citation Excel

Postby Nighthawk117 » Wed Apr 24, 2019 4:35 pm

It says fs2004 but works in fsx

FS2004 Aryus Works Cessna Citation Excel XLS,Citation Shares livery, registration N556CS
Image
User avatar
Nighthawk117
2nd Lieutenant
2nd Lieutenant
 
Posts: 227
Joined: Thu Jan 18, 2018 6:26 pm
Location: Oxford New York

Re: Aryus Works Citation Excel

Postby Nighthawk117 » Wed Apr 24, 2019 4:37 pm

found the upload

Cessna Citation Excel XLS - Citation Shares (N556CS) Cessna Citation Excel XLS - Citation Shares (N556CS)
Cessna Citation Excel XLS - Citation Shares (N556CS) (Category: FS2004 > Civil Jets)
Zip file preview
5.34Mb (5137 downloads)
I am proud to present this Cessna Citation Excel XLS, registration N556CS, in Citation Shares livery in the Aryus Works freeware model. Citation Shares flies this model of the Citation as well as the Bravo, CJ3 and Sovereign. I paid attention to detail and realism as much as possible on this work. I hope you enjoy flying this as much as I enjoyed painting it. I want to thank and give credit to Bryan Bass for inspiring this project. This is a full install package and includes Aryus Works Citation Excel XLS model and air files. Uses default Lear45 panel and sounds. Please see Install.txt for installation details. Repaint by Jeffrey S. Bryner.
Posted Sep 12, 2009 18:28 by Jeffrey S. Bryner
Image
User avatar
Nighthawk117
2nd Lieutenant
2nd Lieutenant
 
Posts: 227
Joined: Thu Jan 18, 2018 6:26 pm
Location: Oxford New York

Re: Aryus Works Citation Excel

Postby Nighthawk117 » Wed May 08, 2019 11:59 am

oddly enough i just hopped in my sikorsky s-43 amphibian. it's been quite awhile. it has same issues as the one you are reporting :think:
Image
User avatar
Nighthawk117
2nd Lieutenant
2nd Lieutenant
 
Posts: 227
Joined: Thu Jan 18, 2018 6:26 pm
Location: Oxford New York

Re: Aryus Works Citation Excel

Postby Chandra8 » Thu Jul 04, 2019 3:18 am

There is no "position" for the gauge, so even if you add, it will not show up. I think this is a limitation in the original VC model.

joker123
Chandra8
Ground hog
Ground hog
 
Posts: 2
Joined: Thu Jul 04, 2019 1:58 am


Return to Flight Simulator X (FSX) and Steam

Who is online

Users browsing this forum: Google [Bot] and 238 guests