Simviation Forums

Hi all,
I need help, can anyone show me how to set the course heading for an ILS landing, on the Posky opensky 777
I can't loctate it. I can do the freq in the radio stack, but can't find the course heading panel.

Many thanks
MB

Ya might wanna watch some YOU TUBE tutorial Videos on ILS approaches and how to set up for an ILS landing & approach.

several videos on Navigation.

[youtube]http://www.youtube.com/watch?v=AM4QYwb8n6o[/youtube]


[youtube]http://www.youtube.com/watch?v=pNIu57W6Z8M[/youtube]


[youtube]http://www.youtube.com/watch?v=D1YVjmfPZSo[/youtube]

Hi,
thank you, but I know how to do an ILS approach on most aircraft, I just cant find the course selector on the posky opensky 777
sorry, thought I made my first post clear.

Thank you
MB

Hi MB,

Without seeing the Posky opensky 777 I cannot be 100% certain but on at least the 737NG series and the 747's it's on the MCP panel and there are two of them.
One for the captains display extreme left and one for the co-pilot extreme right.
In the videos listed by Jetranger, look at the first video at the top row of controls, the one when the video starts is currently displaying 340 deg.

If you had a valid VOR frequency tuned in and in range, if you where heading 340 deg and on the 160 radial FROM the VOR, flying a heading of 340DEG would take you to the VOR, with the display set to VOR, the Purple bar that you also see on ILs approach when centered on the LOC would be in the middle and the display should be showing TO.

Is this what you were asking about?

Where is the plane downloaded from so that others can check it out?

regards

Steve

PS: which 777? 200 or 300 series?

steve