Default Nav 1 setting

[alb469]

Is there any way to change the default freq. setting from 113.7 to one thats closer to most ils freqs. Its a small nuisance when you always have to change down.FS9 had the right idea its default was 110.3.

[Brett_Henderson]

Set it to whatever you like, and then save that as the default flight.

[BFMF]

You consider tuning the radio a nuisance...?

dude, what do you expect, an autotune feature for the nav radios also?

[Fr. Bill]

You consider tuning the radio a nuisance...?

dude, what do you expect, an autotune feature for the nav radios also?

Well, there is one - sort of...

VOR Frequencies

• Open the GPS and switch to the Nearest VOR page.
  
• Press the small, inner knob to enable the cursor.
  
• Use the large outer knob to move the cursor to your desired VOR
  
• Click the "Enter" button to autotune the NAV1 standby freq.

ILS Frequencies

• Open the GPS and switch to the Nearest Airport page.
  
• Press the small, inner knob to enable the cursor.
  
• Use the large outer knob to scroll the cursor to your desired Airport.
  
• Click the "Enter" button to select the Airport.
  
• Switch to the Airport page.
  
• Use the large, outer knob to select the 3rd Airport page containing the available com and nav frequencies.
  
• Enable the cursor.
  
• Scroll down the list to your desired navaid frequency
  
• Press the "Enter" button to auto-tune the nav1 standby frequency.

[Slotback]

I keep it at 110.30. It makes it easier when flying into Seattle.  ;)