FSX on Max Setting

FSX including FSX Steam version.

FSX on Max Setting

Postby Bubblehead » Sun Feb 09, 2014 9:41 pm

It's really puzzling. For a long time I've always had problem playing with FSX crashing on me although I have a fairly good rig (3.2 GHz)and fairly good video card (HD 7700), to minimize problems I've had to keep my setting about mid-level and even at that level I was still experiencing problems mostly the game stopping and a warning stating that MS has encountered problems and has to shut down. I've decided to see a PC tech and I was told that my video card, a PCIe 3.0, was not compatible with my mobo (Asus M5A99FX Pro R2.0) which was a PCIe 2.0 board) Most advices I've had including from this Forum was that my vidoe card should be compatible with my mobo. It was suggested that I install a PCIe 2.0 video card and there are no longer many around I found one and installed an MSI Afterburner Nvidia GeForce GT 6304GB DDR3 PCIe 2.0 which only cost me $105.00. Well I don't know what's so unique about this video card but at this point but I have all my FSX settings (scenery and graphics) at max and the frame rate unlimited have had no problems. I simply wish to share this experience because it was always well known that FSX is very demanding.
User avatar
Bubblehead
Captain
Captain
 
Posts: 851
Joined: Fri Dec 19, 2003 1:35 am
Location: San Diego, California USA

Re: FSX on Max Setting

Postby Hestntonpms » Sun Feb 09, 2014 10:50 pm

It is a good card with 4Gig of 128 Bit memory
Most cards are 1 to 2 Gig but the bit length is higher .

The card I am using has 6144 mb memory or 6 Gig but it is DDR5 and it is 384 bit @ 289 GB per second with 2688 cuda cores.

I still think I would have been fine with the card that is sitting on the floor right now {Nvidia GTX 660 Ti} and I could have saved the money and helped purchase a 1 TB SSD but what's done is done . . . .

We're always better off investing in the best possible processor we can get our hands on first and then the graphics.
The mother board is just as important but at the end f the day your computer will only be as fast as it;s slowest component ,for me that is my hard drive according to all performance tests I have run.
My CPU ranks right up there with some of the best ,not the best but some of the best.
My graphics card is second to none,it is the best and the fastest single GPU card available
My hard drive is my bottle neck and it has to go , but it is a huge nut,there is a place by me that may work out a trade for the GFX card I have,i am going there next week, if they do the swap I will just re-install the 660 Ti that is on the floor :) I really believe it is way overkill for FSX,the thing is , I know what is going to happen, after I get the SSD, I will see something in one of the forums where someone proves it was the Graphics card all along and will need it again and have to pay top dollar for it :)

It is just one big giant revolving door with Upgrade after upgrade anfter upgrade, I must have invested 10 grand into this hobby over the years Crazy right ? which makes me wonder how many computers or upgrades has everyone gone through since their first flight sim . . . .I think I still have the first Microsoft flight sim still in this desk somewhere :)
Gigabyte X79 Chip set Mobo
Intel-i7 4820K CPU/Liquid cooled
Single GTX Titan 6gig GPU/ extreme air cooled
16 gig/1600 MHz quad channel DDR3
1 T/B -Raid-0 array,Risking it all for every ounce of performance until I go with SSD's
User avatar
Hestntonpms
2nd Lieutenant
2nd Lieutenant
 
Posts: 75
Joined: Thu Jan 30, 2014 4:41 pm
Location: Long Island NY

Re: FSX on Max Setting

Postby Dennyyoung » Sun Feb 09, 2014 11:01 pm

I have a .........
ASUS PC M51AC Series
Processor Intel (R) Core (TM) i7 4770 CPU@3.40 GHZ 3.40 GHZ
Memory (RAM)16.0 GB
System 64-bit operating system x64
Windows 8,,,,,piece of crap
BIOS 0901
Memory 16384 MB ram
Directx version Direct x 11

NVIDIA GeForce GT 625. Etc

But I guess this is not able to run FSX Deluxe

Hmmmmm
Dennyyoung
Ground hog
Ground hog
 
Posts: 27
Joined: Mon Dec 30, 2013 11:10 am

Re: FSX on Max Setting

Postby Bubblehead » Sun Feb 09, 2014 11:09 pm

If it did make any difference, I added an 84 Gig Scandisk SSD and used it exclusively for my FSX but that was before I switched to the GT 630.
User avatar
Bubblehead
Captain
Captain
 
Posts: 851
Joined: Fri Dec 19, 2003 1:35 am
Location: San Diego, California USA

Re: FSX on Max Setting

Postby Blaunarwal » Mon Feb 10, 2014 12:30 am

I got a new Asus GTX-770 DirectCU II 2GB GDDR5, PCI-E x16 3 graphics adapter to replace my GTX 570 with 1.3 GB memory, which seemed to be used only at 50% by FSX. So not only the processor speed is important, but also the graphics adapter and it's memory I think. I wish I had a card with 4 GB memory to test.
Dan
OS=WIN11, P3D5
MB=ASUS Z390F-Gaming, CPU=i9700K OC @4.9 GHz, Cooling=Arctic Liquid Freezer II
GPU=KFA2 RTX3090 24 GB, RAM=32 GB DDR4-3200, Saitek X52 Pro
Visit my website: https://sites.google.com/view/dans-p3d-mods
User avatar
Blaunarwal
2nd Lieutenant
2nd Lieutenant
 
Posts: 134
Joined: Sun Oct 24, 2010 1:42 am
Location: LSZH

Re: FSX on Max Setting

Postby Hestntonpms » Mon Feb 10, 2014 9:11 am

Bubblehead the i7 processor and your graphics card are more than powerful enough to run FSX, the 4770. Is a beast! I would say the issue is in windows 8 it just may need to be configured differently? Is there an option to run under win 7 settings?
Gigabyte X79 Chip set Mobo
Intel-i7 4820K CPU/Liquid cooled
Single GTX Titan 6gig GPU/ extreme air cooled
16 gig/1600 MHz quad channel DDR3
1 T/B -Raid-0 array,Risking it all for every ounce of performance until I go with SSD's
User avatar
Hestntonpms
2nd Lieutenant
2nd Lieutenant
 
Posts: 75
Joined: Thu Jan 30, 2014 4:41 pm
Location: Long Island NY

Re: FSX on Max Setting

Postby garymbuska » Mon Feb 10, 2014 9:24 am

I run FSX maxed out on my current system with no problem. I did have to install the uiautomation core.dll and I use RAZOR to make sure noting unnecessary is running.
System specs in signature

<<u
Gary M Buska
SYSTEM Specs ASUS P8Z68 V/GEN 3 mother board: INTELL I7 2600k 3.48 ghz Quad core CPU with Sandy bridge: 12 Gigs of 1800hz ram:
GTX 950 OVER CLOCKED: 2 Gigs Ram Windows 10 Home 64 bit Operating system. 750W Dedicated modular power supply. Two Internal 1TB hard drives 1 External 1TB 3.2 USB hard drive. SAITEK Cessna flight Yoke with throttles.
CH Rudder Peddles 27 inch Wide screen Monitor
User avatar
garymbuska
Major
Major
 
Posts: 4415
Joined: Tue Dec 30, 2003 11:10 am
Location: Jacksonville, Florida

Re: FSX on Max Setting

Postby Hestntonpms » Mon Feb 10, 2014 9:40 am

When I was looking at processors and mobo's I was going to get the 4770 but the guy at intel told me the 4820k had a larger L3 cache and was a little faster for 15 bucks cheaper, it is a different LGA socket too but is not an actual 4th gen CPU no matter what the numbers are, it was released between the ivy bridge and the has well , it is an ivy E cpu
Gigabyte X79 Chip set Mobo
Intel-i7 4820K CPU/Liquid cooled
Single GTX Titan 6gig GPU/ extreme air cooled
16 gig/1600 MHz quad channel DDR3
1 T/B -Raid-0 array,Risking it all for every ounce of performance until I go with SSD's
User avatar
Hestntonpms
2nd Lieutenant
2nd Lieutenant
 
Posts: 75
Joined: Thu Jan 30, 2014 4:41 pm
Location: Long Island NY


Return to Flight Simulator X (FSX) and Steam

Who is online

Users browsing this forum: No registered users and 814 guests