Page 1 of 1
Radio digit config
Posted:
Sun Dec 11, 2011 11:48 amby Falcon Fixer
One of my a/c has a problem with setting the digits on the comm and nav functions i.e. I can't set .35 or .40 or .45. Any help?
[Radios]
// Radio Type = availiable, standby frequency, has glide slope
Audio.1 = 1
Com.1 = 1, 0
Com.2 = 1, 0
Nav.1 = 1, 0, 1
Nav.2 = 1, 0, 0
Adf.1 = 1
Transponder.1 = 1
Marker.1 = 1
Re: Radio digit config
Posted:
Sun Dec 11, 2011 11:57 amby Fozzer
[quote]One of my a/c has a problem with setting the digits on the comm and nav functions i.e. I can't set .35 or .40 or .45. Any help?
[Radios]
// Radio Type = availiable, standby frequency, has glide slope
Audio.1
Re: Radio digit config
Posted:
Sun Dec 11, 2011 12:06 pmby Falcon Fixer
Oh yes, I can change the primary freqs - like 123.xx to 125.xx. It is the .xx I can't change. I notice on my cfg that Nav1 is 1,0,1 and Nav2 is 1,0,0. Does that matter?
Re: Radio digit config
Posted:
Sun Dec 11, 2011 12:32 pmby 1olehippy
Had that happen to me before..it's the gauge itself. You'll need to change the gauge to a known good one in your panel config. Which AC is fighting you?
Dave
Re: Radio digit config
Posted:
Sun Dec 11, 2011 12:51 pmby Falcon Fixer
Gulfstream G-V
Re: Radio digit config
Posted:
Sun Dec 11, 2011 12:54 pmby Fozzer
[quote]One of my a/c has a problem with setting the digits on the comm and nav functions i.e. I can't set .35 or .40 or .45. Any help?
[Radios]
// Radio Type = availiable, standby frequency, has glide slope
Audio.1