Simviation Forums

I want Mike Stone's AT9 to park at a Small Ramp with the assigned code of CAT (for Curtis AT) & have added this to the
cfg: atc_parking_types=Ramp & atc_parking_codes=CAT - however,

[quote]I want Mike Stone's AT9 to park at a Small Ramp with the assigned code of CAT (for Curtis AT) & have added this to the
cfg: atc_parking_types=Ramp & atc_parking_code=CAT - however,

Well, I use it as AI & haven't had any problems before.
Oh yes - the parking was edited with AFCAD & the radius of the AT9 is 24ft (8m) & the Ramp is 32ft.  I tried a Medium Ramp to no avail.   As I've said the 2 Austers & Dak go to assigned parking, but not the AT9.........I get irritated when things don't work as expected & can't work out what I've done wrong, or not done 

If you have done all the right things to match a/c with parking space, try moving the allocated parking up the list in the  ...list/parking menu. The plane may just be fitting itself to the first parking it finds.

Well, I'd missed the s from code on the cfg so no wonder it didn't work.  I checked it all lots of times too!!  I hope this isn't the start of my going ga ga