Problem with newly downloaded HH-65c
Posted:
Thu Dec 11, 2008 6:17 pmby zzzpops
After I select the HH-65c, and hit the FLY NOW! button, the 'copter, when finished loading, ends up about 3 or 4 feet into the runway. This in turn causes the sim to simulate an aircraft
Re: Problem with newly downloaded HH-65c
Posted:
Thu Dec 11, 2008 11:31 pmby Sean_TK
Try replacing your contact points section with this:
[contact_points]
static_pitch = -00
static_cg_height = 5.38
max_number_of_points = 3
point.0 = 1, 10.2398, 0, -5.1666, 1200, 0.0, 0.5, 45, 0.3, 2.5, 0.687, 3, 3, 0, 200, 200
point.1 = 1, -2.5566, -3, -5.3001, 1200, 1.0, 0.6, 0, 0.3, 2.5, 0.687, 3, 3, 0, 200, 200
point.2 = 1, -2.5571, 3, -5.3001, 1200, 2.0, 0.6, 0, 0.3, 2.5, 0.687, 3, 3, 0, 200, 200
gear_system_type=0
I use the HH-65C quite a bit, and I added every paintjob that I know of on the internet, and also made some cockpit mods based off of FSPainter's mod of Antti's original AS365 short nose.
Throughout this, I also found the contact points fix somewhere, and it is now my favorite helicopter to fly!
Re: Problem with newly downloaded HH-65c
Posted:
Sat Dec 13, 2008 9:31 amby Morris68
Hello, My name is Maurizio.
I have problems with the directional indicator on the CDI HH-65C.
When imposed the VOR frequency indicator does not place.
What could be the problem?
Thanks
Re: Problem with newly downloaded HH-65c
Posted:
Sat Dec 13, 2008 12:42 pmby Sean_TK
I remember having issues with this gauge in the past, in that the ADF portion never worked. It may need to be replaced with another gauge. I'll look into it later.
Re: Problem with newly downloaded HH-65c
Posted:
Sat Dec 13, 2008 2:44 pmby zzzpops
Resetting the contact points did the trick.
Thanks! SeanTK.
Re: Problem with newly downloaded HH-65c
Posted:
Sat Dec 13, 2008 2:54 pmby Morris68
How can I replace it with another instrument?
You can help me?
Thanks
Re: Problem with newly downloaded HH-65c
Posted:
Sat Dec 13, 2008 2:57 pmby Morris68
> Resetting the contact points did the trick. <
How to Make?
Re: Problem with newly downloaded HH-65c
Posted:
Sat Dec 13, 2008 4:29 pmby Sean_TK
To adjust the contact points, open the aircraft.cfg with notepad or Wordpad, and copy and paste my contact points section into the contact points section that is already there, replacing it.
I will have to search for a replacement gauge later in order to get the VOR system to work, in the mean time, just use the GPS system. I believe it is one of the shift+# keys, so try one of those.