737 Throttle
Posted:
Mon May 19, 2008 12:23 pmby Adnan Sajid
Hi!
There is a problem in my 737 default panel Throtle.If if Increse or decrease it only left side handle goes up and down instead moving both the handle at a time .How can I fix it or there is some key command to join both of the handles to react together
Re: 737 Throttle
Posted:
Mon May 19, 2008 12:32 pmby Hagar
I copied this from the FS9 Learning Center
ENGINE COMMANDS
On multiengine aircraft, engine commands affect all engines unless you first select an engine by pressing E + engine number (1-4). To revert back to controlling all engines, press E + all engine numbers in quick succession (E, 1, 2, and so on).
Re: 737 Throttle
Posted:
Mon May 19, 2008 12:33 pmby beaky
What are you controlling the simulator with? Keyboard? Controller?
Re: 737 Throttle
Posted:
Mon May 19, 2008 12:40 pmby dave3cu
Refer to Hagar's post for the fix.
The reason it happened is probably an errant press of the 'E' key, maybe when opening/closing exits, or 'autostart' (hitting the 'E' early or late).... If the sim sees a stand alone 'E' keypress with no numbers following, it assumes engine #1 (left engine).
If you're starting from a saved flight, you should load the flight, activate 'all engines', and resave.
Dave