Page 1 of 1
Taking off problem
Posted:
Tue Feb 28, 2006 12:01 pmby VVM
hi all. i am having (i think) a little problem with take offs in my POSKY 757 (winglet). when im taking off, the plane seems to want to lift off from the back left i.e the left wing rises and the whole plane tilts forward. anybody got any clues as to what might be wrong? i was using real world weather at the time and was at newark.
many thanks,
scott
Re: Taking off problem
Posted:
Tue Feb 28, 2006 12:05 pmby Brett_Henderson
Make sure the auto pilot is off..
Re: Taking off problem
Posted:
Tue Feb 28, 2006 1:41 pmby Cobra
Might want to look at the Fuel/Cargo payload, can make strangeee things happen!
Re: Taking off problem
Posted:
Tue Feb 28, 2006 2:53 pmby beefhole
Might want to look at the Fuel/Cargo payload, can make strangeee things happen!
But pay no mind to the CG-in my POSKY 752 its all the way forward all the time, nothing that can be fixed.
Check the AP (most common reason why that happens on takeoff) and your elevator trim (which is controlled by the AP when it is on)
Re: Taking off problem
Posted:
Thu Mar 02, 2006 11:26 amby n_richardson05
maby the config files or flight dynamics are weard try playing with the realism settings that might help fix things but its a long shot
Re: Taking off problem
Posted:
Thu Mar 02, 2006 1:33 pmby machineman9
if ur using a joystick, check the xand y axis to check they aren't out of center
Re: Taking off problem
Posted:
Thu Mar 02, 2006 3:05 pmby G-EORGE
if ur using a joystick, check the xand y axis to check they aren't out of center
I don't know about anyone else, but with my particular stick (Saitek Cyborg Evo force) when I start the sim for the first time since I swtiched the stick on, I have to move it about all the axes, turn the rudder etc to get everything centered.
Re: Taking off problem
Posted:
Thu Mar 02, 2006 3:19 pmby beefhole
I don't know about anyone else, but with my particular stick (Saitek Cyborg Evo force) when I start the sim for the first time since I swtiched the stick on, I have to move it about all the axes, turn the rudder etc to get everything centered.
I have to calibrate each and every time I restart the computer.