Page 1 of 1

Water effects slider won't stay on high!

PostPosted: Sun Jan 08, 2006 7:54 pm
by mojavepilot
I recently downloaded Lynn and Bill Lyons Silver Wings Edition ( I think thats the name) scenery package.  For some reason when I slide the water effects slider to High it stays there, but when I go back to main settings menu then reopen display its right back on low where it started.  I can't make it stay on high!!!  I did a search, but I'm not the best searcher, and therefore found no help in searching.  Can anyone help me??  Thanks in advance.

                                                              mojavepilot

Re: Water effects slider won't stay on high!

PostPosted: Sun Jan 08, 2006 7:56 pm
by cloud9
I have that same problem :o

Re: Water effects slider won't stay on high!

PostPosted: Sun Jan 08, 2006 8:28 pm
by Katahu
This is a common problem among those who have low-end video cards. If your video card doesn't support DirectX 9, then the sim will not render the water reflections.

I had an older computer that had a GeForce 4 MX440 with 128MB. Even with that card, the sim could render the reflections because that card didn't support DX9 [even if DX9 was installed].

Re: Water effects slider won't stay on high!

PostPosted: Sun Jan 08, 2006 8:40 pm
by mojavepilot
Where might I buy one of these cards and how much $ can I expect to pay for one.  Thanks for the help.  

Re: Water effects slider won't stay on high!

PostPosted: Sun Jan 08, 2006 10:11 pm
by BAW0343
i got a gforce 4 and it doesent work   its the video card that wont support it,  my dads comp has a 5500 and it works great, diffrence of one type.    you can get a new vid card at best buy and i dont know price

Re: Water effects slider won't stay on high!

PostPosted: Sun Jan 08, 2006 10:30 pm
by TacitBlue
Try http://www.newegg.com

They usually have good prices. I'm not really a hardware expert, so I can't make any recommendations other than the fact that my GeForce 6600GT is wonderful and displays the water effects as they should be.

Re: Water effects slider won't stay on high!

PostPosted: Mon Jan 09, 2006 6:05 am
by Alphajet_Enthusiast
You'll need a directx9 compliant card.

Cheapest you can go is the Geforce FX5200, for which you'll pay about $80 or less.

My card is a Geforce 7800 and in dollars was around $600, but you really get god good graphics and performance for that money.

There is a range of cards with various prices in between.
Have a look on www.nvidia.com and www.ati.com...
:)

Re: Water effects slider won't stay on high!

PostPosted: Mon Jan 09, 2006 7:02 pm
by mojavepilot
Thanks for the replies I guess I have some shopping to do.  Good thing I still have gift cards from Christmas  ;D

Re: Water effects slider won't stay on high!

PostPosted: Mon Jan 09, 2006 8:27 pm
by Katahu
I had an older computer that had a GeForce 4 MX440 with 128MB. Even with that card, the sim could render the reflections


Oops. I meant it couldn't. Typo. ::)