Page 1 of 1
Weird problem...gets on ur nerves...
Posted:
Wed Apr 20, 2005 6:03 pmby Stormtropper
Ok...whenever i press "Shift+E+2", "Shift+E+3", etc... the sim regesters it as "Shift+E"...
so I can't open the 2nd and 3rd exits....
I already tried rebooting the sim and restart..didn't work...
Jeff
Re: Weird problem...gets on ur nerves...
Posted:
Wed Apr 20, 2005 6:55 pmby beefhole
shift+e+3 never works for anything, but I have had the problem of shift+e+2 not working. Try reloading the aircraft/restarting the game (I know you've tried this, try it again)
Re: Weird problem...gets on ur nerves...
Posted:
Wed Apr 20, 2005 8:00 pmby dave3cu
For starters not all a/c have 2nd and 3rd exits....
For those that do, are you pressing Shift+e (press
Re: Weird problem...gets on ur nerves...
Posted:
Wed Apr 20, 2005 8:13 pmby beefhole
No, this is a legit problem. I've had trouble with this before, and I assure you I knew what I was doing.
Re: Weird problem...gets on ur nerves...
Posted:
Wed Apr 20, 2005 9:19 pmby jordonj
If you have a Saitek X45 and have the mode switch on the throttle on any other mode than M2, then shift+e,2 won't work...
Re: Weird problem...gets on ur nerves...
Posted:
Wed Apr 20, 2005 11:47 pmby gr31
This bugged me for a long time till I came up with another answer. Assign extra buttons on my joystick to the "shift-E" and "select 2" options. Then you just hit the select 2
first and holdit while you hit the shift-e button. Works great for me
Note: set the sliders as shown or it may not work correctly!
Hope that helps!!