Page 1 of 2
Radar with fighter panels doesn't work, Have FSUIP
Posted:
Wed Dec 08, 2004 4:22 pmby Anti-Societys Snake
I had the fsuipc before the new relese, no Radar worked, and now I have the new relese and no radar is working, all fsuipc is free ware, I have fs9 without the patch.
Re: Radar with fighter panels doesn't work, Have F
Posted:
Wed Dec 08, 2004 7:29 pmby WebbPA
Re: Radar with fighter panels doesn't work, Have F
Posted:
Wed Dec 08, 2004 9:46 pmby Anti-Societys Snake
it isn't working... do I need to run AIBrige?
Re: Radar with fighter panels doesn't work, Have F
Posted:
Thu Dec 09, 2004 8:28 amby ozzy72
Try the freeware alternative its called FDSConnection and is available at
http://www.flightdecksoftware.comThis should enable the radar to work
Re: Radar with fighter panels doesn't work, Have F
Posted:
Thu Dec 09, 2004 12:07 pmby Anti-Societys Snake
It still doesn't work, I even remoooved fsuip..... what's with this?...... And... I don't see any planes in the sky... even at o'hare. :(
Re: Radar with fighter panels doesn't work, Have F
Posted:
Thu Dec 09, 2004 3:44 pmby ozzy72
Are you sure you've installed the radar correctly? I've not had any trouble with any models using radar...
Re: Radar with fighter panels doesn't work, Have F
Posted:
Thu Dec 09, 2004 5:45 pmby TacitBlue
I don't see any planes in the sky... even at o'hare.
this might be a dumb question... are you sure you have AI traffic turned on?
Re: Radar with fighter panels doesn't work, Have F
Posted:
Fri Dec 10, 2004 11:16 amby Anti-Societys Snake
I have general and Airline trafic cranked up the the max. Ozzy, What would I have to do to install radar? I use F16.gau , All I did was move the gauge to the fs9 gauge folder.
~hanzaki
Re: Radar with fighter panels doesn't work, Have F
Posted:
Fri Dec 10, 2004 7:50 pmby Fox_Molder
if you use F16.gau you will need to register it in FSUIPC (it is free see on his forum he give a bunch of key)
then you should get AIbridge and register it FREE again. same place. you got the key for f16.gau
then log you AIbrige on to you FS9 server then connect you fs9 to the server and voila you should see airplane in the apache or f16 or any other that use this gau.
hint you could modifie a plane to use it....
Re: Radar with fighter panels doesn't work, Have F
Posted:
Sun Dec 12, 2004 9:13 pmby Anti-Societys Snake
I need the Radar to work Offline.
Re: Radar with fighter panels doesn't work, Have F
Posted:
Mon Dec 13, 2004 5:14 amby Politically Incorrect
If you are using the F16 panel by Eric Marciano (fullf16pnl.zip) you need to install it by the instructions included with the panel.
BUT if the F16 you are refering to is the one by Kirk Olsen you must use the "panel.cfg" provided by Kirk not the one that came with the panel itself
Re: Radar with fighter panels doesn't work, Have F
Posted:
Mon Dec 13, 2004 11:55 amby Anti-Societys Snake
well, I'm using just the gauge called f16.gau. it came with a tomcat panel . I am however using the panel from here called F16pnlem.zip . I am not using the panel file that came with it, should I?
Re: Radar with fighter panels doesn't work, Have F
Posted:
Mon Dec 13, 2004 11:57 amby Anti-Societys Snake
BUT if the F16 you are refering to is the one by Kirk Olsen you must use the "panel.cfg" provided by Kirk not the one that came with the panel itself
This is what I am doing.
Re: Radar with fighter panels doesn't work, Have F
Posted:
Tue Dec 14, 2004 5:59 amby Politically Incorrect
That may be the problem. Kirks plane was designed to use a panel by Eric Marciono you can find it here:
http://63.217.28.218/files/1panels/fullf16pnl.zipIn one of the "read me" files it gives instructions on what to do, you need to use the "panel.config" that is supplied by Kirk instead of the one that came with the panel
edit: You do need FSUPIC for the radar to work
Re: Radar with fighter panels doesn't work, Have F
Posted:
Tue Dec 14, 2004 12:30 pmby Anti-Societys Snake
okay, I'll let you know how it works when It's done downlaoding. but shouldn't the gauge work as it's own device? I mean, in other pannels?