Print view
Board index ‹ Current Flight Simulator Series ‹ FS 2004 - A Century of Flight

Pitch settings not holding

Forum dedicated to Microsoft FS2004 - "A Century of Flight".
Post a reply

Pitch settings not holding

Postby stevewilson » Sun Sep 26, 2004 7:53 pm

If it not one thing its another ;)

I'm using the Saitek X45 joy stick and I have the elevator pitch , down/up, assigned to buttons 2 & 3 respectivly.

The problem is that after I set the pitch for level flight if I touch the joy stick to turn I lose the pitch settings.

Has anyone had this problem and how to correct it?
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.
Top

Re: Pitch settings not holding

Postby jordonj » Sun Sep 26, 2004 8:15 pm

I have the Pitch assigned to the hat (the one other than the one other than the one that has you look around in the VC).

Does the pitch trim indicator change...the wind in the game will make a difference!
My first flight in a 172 on August 20, 2004
Image

Doing the right thing is more important than doing the thing right. (P. Drucker)

When all think alike, then no one i
User avatar
jordonj
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 5314
Joined: Mon Jun 14, 2004 11:40 pm
Location: Michigan
Top

Re: Pitch settings not holding

Postby JBaymore » Sun Sep 26, 2004 8:53 pm

If the AP is engaged... it can alter your trim settings right back as soon as you try to change them.

best,

...............john
Image ImageIntel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 720
User avatar
JBaymore
Global Moderator
Global Moderator
 
Posts: 10020
Joined: Sat May 24, 2003 9:15 am
Location: New Hampshire
Top

Re: Pitch settings not holding

Postby stevewilson » Sun Sep 26, 2004 9:16 pm

jordonj: Some of the AC don't have a pitch control and those that do I haven't noticed if it moves back to center.

John: AP is not engaged.

This is happening on all ACs, And very little to no wind.
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.
Top

Re: Pitch settings not holding

Postby dave3cu » Sun Sep 26, 2004 11:07 pm

Steve

Sounds like maybe you made assignments for the 'pitch down (elevator)' and 'pitch up (elevator)' which is the actual elevator control which are normally assigned to num8 and num2, and the joystick y axis.

For 'elevator
Last edited by dave3cu on Sun Sep 26, 2004 11:14 pm, edited 1 time in total.
At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation.
dave3cu
Major
Major
 
Posts: 3141
Joined: Sun May 19, 2002 9:55 am
Location: 3CU, Northern Wisconsin, USA
Top

Re: Pitch settings not holding

Postby stevewilson » Mon Sep 27, 2004 1:51 am

Dave that is what I had done. Changed it to elevator trim and it works much better.

The funny thing is that in the cessna when I now work the trim buttons, the pitch wheel on the panel moves, it didn't move when I had the buttons assinged to the pitch control. ???

Thanks guys for your help.

Steve
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.
Top

Re: Pitch settings not holding

Postby dodger » Mon Sep 27, 2004 8:16 pm

Steve, FYI I have the #3 hat (on the X45 throttle) assigned to pitch and aileron trim functions, mainly 'cause I'm not wiggling that hand much and figured I would have less chance of inadvertent actions. Of course you probably have other priorities for that hat - which is why we have an X45, right?
AMD 64 X2-5200, NVidia 9600GT 512, 2048 DDR, 2x250 GB SATA, Saitek X45, Win XP SP3 (Win7-64bitRC1 and FSX on 2nd HD)
dodger
2nd Lieutenant
2nd Lieutenant
 
Posts: 123
Joined: Fri Jan 09, 2004 12:47 am
Location: Similkameen Valley, BC, Canada
Top

Re: Pitch settings not holding

Postby stevewilson » Tue Sep 28, 2004 12:27 am

Dodger:  Used to have something assigned to that hat switch, but removed it cause I tend to rest my finger on it. Some of the other settings that I have are:

Fire Button D= flaps down in stages

mouse cursor control= view forward / backward

mouse fire button= flaps up in stages

pinkie switch= speed break

Just to name a few.

Have you been able to figure out how to use the AUX., and Mode 1 switchs?

Steve
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.
Top
Post a reply

Return to FS 2004 - A Century of Flight

Who is online

Users browsing this forum: No registered users and 394 guests