Page 1 of 1
Pilot in distress

Posted:
Tue Aug 24, 2004 4:16 pm
by Redbaron64
Can somebody tell me how to turn off the engines when there are no controles in the cockpit to do that

. Help please, pilot in distress

.
Re: Pilot in distress

Posted:
Tue Aug 24, 2004 4:48 pm
by Nexus
CTRL + SHIFT + F1
I think that's the command to shut off all the engines?
Re: Pilot in distress

Posted:
Tue Aug 24, 2004 4:50 pm
by Privatepilot1219
it depens on what type of aircraft.
cessna-put the ignition key to off. or pull back the micture lever back.
all boeing aircraft- goto throttle control and look at the bottom of the panel.
or use control=shift+F1.
Re: Pilot in distress

Posted:
Tue Aug 24, 2004 5:16 pm
by Galactic_eyes
it depens on what type of aircraft.
cessna-put the ignition key to off. or pull back the micture lever back.
all boeing aircraft- goto throttle control and look at the bottom of the panel.
or use control=shift+F1.
Its called the mix-master. Pull the mixture knob all the way out till the motor shuts down. Turn the master and Batt. switches off. Then turn off your Ignition switch. For the Cessna that is. Thats what my instructor calls it.
Re: Pilot in distress

Posted:
Tue Aug 24, 2004 5:47 pm
by Redbaron64
Thanks guys it works

Re: Pilot in distress

Posted:
Tue Aug 24, 2004 5:55 pm
by wji
Before restart remember to set the mixture back to rich: CTRL+SHFT+F4
BILL
Re: Pilot in distress

Posted:
Tue Aug 24, 2004 6:01 pm
by Galactic_eyes
Before restart remember to set the mixture back to rich: CTRL+SHFT+F4
BILL
Good point. Otherwise you'd be there all day trying start your plane.
Re: Pilot in distress

Posted:
Tue Aug 24, 2004 6:16 pm
by terbert

Try ..m and -
Tony
Re: Pilot in distress

Posted:
Tue Aug 24, 2004 8:58 pm
by MadDriver
I haven't been able to find any controls on the panel of the learjet to turn it off... haven't really looked too hard though.
Re: Pilot in distress

Posted:
Wed Aug 25, 2004 1:51 am
by Skittles
Use the Run/Cut switches down by the throttles.
Re: Pilot in distress

Posted:
Wed Aug 25, 2004 5:28 am
by Gixer
Go to your keyboard assignments. Assign a key for engine shutdown!
I use ctrl+shift+E