by _526th_Fireman » Tue May 04, 2004 9:50 pm
Get the ILS freq. from the map of the RW you intend to use. Note the true heading of that RW. Put the true heading into your COURSE heading of your Auto Pilot. Put the ILS freq. of the RW in NAV 1 or your radio. Make sure you have selected to use NAV 1. Go ahead and hit your APPROACH button on your AP. When you get close enough, the ILS "beam" will take over since you had hit your "APPROACH" button and steer you into the heading of your runway. All you have to do is follow the glide slope indicator, reducing speed and adding flaps. Also watch the little pink indicator to make sure you are on course. Usually when I get fairly well lined up, I turn off the APPROACH in the AP and go down manually. When you get proficient at this, try some with some weather and a low deck to test your skills and get you used to trusting your readings and gauges. What a thrill.
Systemax Sabre Ultimate gaming rig.
I got all the goodies and all the power I need to run anything thrown at me for the next two months!