Page 1 of 1

Need a Little Advice on The ATI9600xt with FS9

PostPosted: Mon Mar 01, 2004 11:37 pm
by VPA_KTPA
See my system spec below.i have been looking at some video cards.and i have got my eye on the ATI 9600xt model.from what all i have read this is a pretty good card.i just wanted to get some feed back from those that are useing this card with the FS9 simulator.so tell me what you think of it yea or nay.or recomend some thing thats good in the 9600xt price range.i can get the 9600xt 128 MB DDR for $200 us dollars.thanks for any reply.

Re: Need a Little Advice on The ATI9600xt with FS9

PostPosted: Tue Mar 02, 2004 3:50 am
by Delta_
It is an excellent card.

Re: Need a Little Advice on The ATI9600xt with FS9

PostPosted: Tue Mar 02, 2004 7:25 am
by kemplen
...Havn't looked back, went from a fx5200 around nov/dec last year,  up from 17-20 fps to 35-40 fps same flight (set up as a bench mark before the switch) so exact same settings .... a fantastic differance ..... do it!

Re: Need a Little Advice on The ATI9600xt with FS9

PostPosted: Tue Mar 02, 2004 11:13 am
by VPA_KTPA
Ok thanks for the imput.i guess ill go for it.i hope congos video chart is good cause it says the 9600xt is a really big step up from the 5200fx.thanks again.till next time have fun.

Re: Need a Little Advice on The ATI9600xt with FS9

PostPosted: Tue Mar 02, 2004 3:34 pm
by TerryW
I have the 9600 XT, a good move up compared to the GeForce 4 MX 440 I had. I calculate in CDN $, but US$200 is pretty steep,..believe you should be able to get a better price. NCIX sells it for about CDN$ 240, which is probably closer to US$160 or so....all the best,
Terry

Re: Need a Little Advice on The ATI9600xt with FS9

PostPosted: Tue Mar 02, 2004 6:20 pm
by VPA_KTPA
Ok i just got the card in.and turned everything up even clouds is maxed out and no drop in FPS.if i hadnt seen it with my own eyes it would be hard for me to beleave it i thought i was going to have to upgrade to a 3.0 GHz to get happy.but one problem every thing looks great except the aircraft has jagged edges i have it on 8 x but i didnt see no antilassing in hardware setting.can any one tell me how this one small problem might get fixed.and as allways i installed the newest driver for it.i say bravo on the recomendation it really looks good.TerryW thats the cheapest i could find this card where i am everyone eles want $250.00 but for the results i am getting i wont complain one bit with what i paid for it.if i had upgraded to the 3.0Ghz that would have costed me $400 u.s dollars.so since i dont have to do that now i guess i saved $200.thanks for the replies.

Re: Need a Little Advice on The ATI9600xt with FS9

PostPosted: Wed Mar 03, 2004 4:51 am
by Delta_
In control panel set-up the AA to 4x and keep it off in the game.  4x is only supported by most games not 8x.

Re: Need a Little Advice on The ATI9600xt with FS9

PostPosted: Wed Mar 03, 2004 1:13 pm
by VPA_KTPA
Thanks Hyvry1_Delta.i found the tab in video card settings where you can go in and change each setting.and i must say its looks wonderful now.and thanks for recomending that card its a big impovement over the nvidia 5200fx.

Re: Need a Little Advice on The ATI9600xt with FS9

PostPosted: Wed Mar 03, 2004 6:11 pm
by FaxCap
This thread is just about over but I thought I would add I am also running a 9600XT and I am VERY happy with it. I am running the Omega 3.9 drivers.  I know there are newer Omegas but my 9600XT is working so well I don't want to mess with it.  :)

Had a buddy (also a FS'er) drop by and I showed him a couple of aircraft with bare metal textures.....he just about fell on the floor he was so impressed with the dynamic shine.  :D

FaxCap

Re: Need a Little Advice on The ATI9600xt with FS9

PostPosted: Thu Mar 04, 2004 1:46 am
by Delta_
I love doing that to my friends aswell.  I sometimes take some shots into sixth form and show them to people.  They can't believe how realistic they are. 8)