Problem with newly downloaded HH-65c

[zzzpops]

After I select the HH-65c, and hit the FLY NOW! button, the 'copter, when finished loading, ends up about 3 or 4 feet into the runway. This in turn causes the sim to simulate an aircraft

[Sean_TK]

Try replacing your contact points section with this:

[contact_points]
static_pitch = -00
static_cg_height = 5.38
max_number_of_points = 3

point.0 = 1, 10.2398, 0, -5.1666, 1200, 0.0, 0.5, 45, 0.3, 2.5, 0.687, 3, 3, 0, 200, 200
point.1 = 1, -2.5566, -3, -5.3001, 1200, 1.0, 0.6, 0, 0.3, 2.5, 0.687, 3, 3, 0, 200, 200
point.2 = 1, -2.5571, 3, -5.3001, 1200, 2.0, 0.6, 0, 0.3, 2.5, 0.687, 3, 3, 0, 200, 200
gear_system_type=0


I use the HH-65C quite a bit, and I added every paintjob that I know of on the internet, and also made some cockpit mods based off of FSPainter's mod of Antti's original AS365 short nose.
Throughout this, I also found the contact points fix somewhere, and it is now my favorite helicopter to fly!

[Morris68]

Hello, My name is Maurizio.
I have problems with the directional indicator on the CDI HH-65C.

When imposed the VOR frequency indicator does not place.

What could be the problem?

Thanks

[Sean_TK]

I remember having issues with this gauge in the past, in that the ADF portion never worked. It may need to be replaced with another gauge. I'll look into it later.

[zzzpops]

Resetting the contact points did the trick.

Thanks! SeanTK.

[Morris68]

How can I replace it with another instrument?
You can help me?
Thanks

[Morris68]

>  Resetting the contact points did the trick. <

How to Make?

[Sean_TK]

To adjust the contact points, open the aircraft.cfg with notepad or Wordpad, and copy and paste my contact points section into the contact points section that is already there, replacing it.

I will have to search for a replacement gauge later in order to get the VOR system to work, in the mean time, just use the GPS system. I believe it is one of the shift+# keys, so try one of those.