Aircraft.cfg............................I Think?

[BuzzDatAzz]

I am having a problem my 727-200. I cannot get A/T to engage. No matter what panel I use I get the same result. I think I need to alter the Aircraft.cfg file.

Does anyone know how to alter this file so that the A/T will work? I don't thin it is the panel.cfg , bcause I get the same result no matter what panel I use. Maybe I could add the A/T section of one of my functioning aircraft.cfg and just copy and paste it into the problem aircraft.cfg. Only thing is I don't know what section of the aircraft.cfg controls A/T.

Thanks in Advance for you help!!!

[G-Fire25]

I'm just shooting in the dark here, but could it be that the function is not modeled in? I'm not that far in learning to model.

[argus_hunter]

After you are airborne and you have selected A/P if the A/T does not work try SHIFT + R then reselect A/S hold... should work now as indicated by the "light" coming on by the A/S switch.  I find I have to do this on most flights and with nearly all aircraft.  Found this fix on another forum somewhere.  Hope it works for you.     Cheers,

[microlight]

Make sure that the [autopilot] section in your aircraft.cfg contains the following lines:

autothrottle_available=1
autothrottle_arming_required=1

This will only work if the panel you are using has autothrottle switches modelled (most 727s didn't have autothrottle) - you'll need to switch on the autothrottle and then the speed hold switches. If your panel only has a speed hold switch and no autothrottle switch, change the second line above to read 0 rather than 1.

[BuzzDatAzz]

Thanks a miilion guys!!! It worked!!!  ;D