GPS

[Zircona]

Hi All!

Did some one know How I can enter a point in the GPS.
I have some coordonate which indicate my house.
I want to be able to go to and thing like that.

N 51.00.00 E 81.00.00

Something like this.

Thanx

Zircona

[RollerBall]

When you create and save a flightplan using the fs flightplanner, it saves the plan in a folder (FS2004 - in Flight Simulator Files in My Documents). You can edit these plans with Wordpad. For example,

[flightplan]
AppVersion=9.0.30612
title=LSGG to LOWI
description=LSGG, LOWI
type=IFR
routetype=2
cruising_altitude=13000
departure_id=LSGG, N46* 13.89', E6* 6.52', +001410.99
departure_position=GATE 12
destination_id=LOWI, N47* 15.69', E11* 21.38', +001900.00
departure_name=Geneva
destination_name=Innsbruck
waypoint.0=, LSGG, , LSGG, A, N46* 13.89', E6* 6.52', +001410.99,
waypoint.1=LS, GVA, , GVA, V, N46* 15.23', E6* 7.93', +000000.00,
waypoint.2=LS, SPR, , SPR, V, N46* 28.12', E6* 26.88', +000000.00, Y58
waypoint.3=LS, SPR06, , SPR06, I, N46* 31.15', E6* 34.38', +000000.00, G5
waypoint.4=LS, SPR12, , SPR12, I, N46* 34.15', E6* 41.90', +000000.00, G5
waypoint.5=LS, REVLI, , REVLI, I, N46* 35.18', E6* 44.60', +000000.00, G5
waypoint.6=LS, FRI, , FRI, V, N46* 46.66', E7* 13.41', +000000.00, G5
waypoint.7=LS, TELNO, , TELNO, I, N46* 46.32', E7* 16.25', +000000.00, W112
waypoint.8=LS, KORED, , KORED, I, N46* 51.03', E7* 24.85', +000000.00, N871
waypoint.9=LS, KONOL, , KONOL, I, N46* 59.72', E7* 40.85', +000000.00, N871
waypoint.10=LS, BERSU, , BERSU, I, N47* 8.13', E7* 56.48', +000000.00, N871
waypoint.11=LS, SUREP, , SUREP, I, N47* 9.92', E8* 0.65', +000000.00, N871
waypoint.12=LS, DITON, , DITON, I, N47* 18.13', E8* 20.00', +000000.00, N871
waypoint.13=LS, KUDES, , KUDES, I, N47* 31.25', E8* 51.43', +000000.00, N871
waypoint.14=LS, DINAR, , DINAR, I, N47* 31.65', E9* 2.25', +000000.00, Z2
waypoint.15=LS, BAMUR, , BAMUR, I, N47* 32.68', E9* 32.62', +000000.00, Z2
waypoint.16=LO, ALGOI, , ALGOI, I, N47* 26.85', E10* 29.32', +000000.00, N871
waypoint.17=LO, NORTO, , NORTO, I, N47* 15.98', E11* 15.11', +000000.00, J25
waypoint.18=, LOWI, , LOWI, A, N47* 15.69', E11* 21.38', +001900.00,

It's a simple matter just to insert a waypoint into the plan remembering to then renumber the ones that come after it.

[JRoc]

I've tried to modify a flightplan as per the instructions/key in FS's Learning Centre but to no avail. It will not load into FS at all.

here's what it looks like so far: (problem areas in Red

note: I've tweaked around a bit (adding, and deleting the +LOCWAY and waypoint name, making small changes to the lat and longs), but nothing seems to work.

[flightplan]
AppVersion=9.0.30612
title=CYTR to LDZA
description=CYTR, LDZA
type=IFR
routetype=3
cruising_altitude=33000
departure_id=CYTR, N44* 6.63', W77* 32.11', +000283.00
departure_position=PARKING 20
destination_id=LDZA, N45* 43.93', E16* 3.15', +000353.00
departure_name=Trenton
destination_name=Pleso
waypoint.0=, CYTR, , CYTR, A, N44* 6.63', W77* 32.11', +000283.00,
waypoint.1=K6, MSS, , MSS, V, N44* 54.86', W74* 43.36', +000000.00, J586
waypoint.2=CY, YJN, , YJN, V, N45* 15.35', W73* 19.28', +000000.00, J500
waypoint.3=CY, YFC, , YFC, V, N45* 53.68', W66* 25.13', +000000.00, J581
waypoint.4=CY, YQX, , YQX, V, N48* 53.98', W54* 32.10', +000000.00,
waypoint.5=5050N, U+LOCWAY, N50* 0.00', W50* 0.00', +000000.00,
waypoint.6=5240N, U+LOCWAY, N52* 0.00', W40* 0.00', +000000.00,
waypoint.7=5230N, U+LOCWAY, N52* 0.00', W30 0.00', +000000.00,
waypoint.8=5120N, U+LOCWAY, N51* 0.00', W20* 0.00', +000000.00,
waypoint.9=EI, DINIM, , DINIM, I, N51* 0.00', W14* 59.99', +000000.00, UN514
waypoint.10=EG, LESLU, , LESLU, I, N51* 0.00', W8* 0.00', +000000.00, UB40
waypoint.11=EG, MERLY, , MERLY, I, N51* 20.00', W5* 0.00', +000000.00, UM140
waypoint.12=EG, DVR, , DVR, V, N51* 9.75', E1* 21.55', +000000.00, UL9
waypoint.13=EG, KONAN, , KONAN, I, N51* 7.85', E2* 0.00', +000000.00, UL607
waypoint.14=EB, KOK, , KOK, V, N51* 5.68', E2* 39.10', +000000.00, UM150
waypoint.15=ED, TGO, , TGO, V, N48* 37.10', E9* 15.55', +000000.00, UL607
waypoint.16=LO, ARNOS, , ARNOS, I, N46* 32.48', E13* 34.16', +000000.00, UP735
waypoint.17=LJ, MAGAM, , MAGAM, I, N45* 58.36', E15* 42.18', +000000.00,
waypoint.18=, LDZA, , LDZA, A, N45* 43.93', E16* 3.15', +000353.00,

any tips/fixes?

[JRoc]

I finally got it to work by first making the plan in FSNavigator (with ease), then exporting to a .PLN.