Mr DeSilva Your SDG119 Does Not Work

[caseyjones]

Dear Mr Desilva I tried flying your modification of Mr Yamato's C119 The Plane you did with over all bright metal
but it is next to impossible to get the engines started I have tried everything I can think of but the engines will
not start,

Thanks

Casey

[turbodak]

Why blame the painter for something he obviously didn't touch?

This sounds like a model problem, not a texture issue.

You should try to talking to the developer about this, not the painter.

[Nighthawk117]

ctrl + e doesnt always work. There are aircraft that are cold start and require the fuel to be turned on mixture set and magnetos turned on etc. Have you tried that as well?

[elijahnelson]

Test whether you can start the engines on default aircraft within the simulatormapquest. This can help determine if the issue is specific to the modification or a more general problem.

[LeviAckerman]

Have you solved the problem yet? contexto

[serbir]

Open file Aircrat.cfg with a text editor, Notepad or Notepad++ will do.

Search for the line:
engine_type = 3 //0=Piston, 1=Jet, 2=None, 3=Helo-Turbine, 4=Rocket, 5=Turboprop

change the engine_type value from 3 to 0, it did the trick for me:
engine_type = 0 //0=Piston, 1=Jet, 2=None, 3=Helo-Turbine, 4=Rocket, 5=Turboprop

[Noah101]

It sounds frustrating to have trouble getting the engines started on the modified C119. Have you checked the fuel system and electrical connections? Sometimes, issues can stem from simple oversights. If you haven't already, consulting the manual for troubleshooting steps specific to the modifications might help. Good luck, and I hope you get it sorted out soon! temple run 2