AI Question

Adding Aircraft Traffic, airport gates, etc, to your Sim - AFCAD, TTools, Project AI, AI Aircraft, etc

AI Question

Postby Brando14100 » Sat Feb 28, 2009 12:50 pm

Hey guys. I just had a quick question about WOAI. I have tons of packages installed, but it seems like whenever I fly they're never there. Is there a certain time of day when there's a lot of traffic or something? Thanks.

8-)
Brando14100
 

Re: AI Question

Postby ShaneG_old » Sat Feb 28, 2009 12:53 pm

Do you ever see AI, only in some places, are there any at gates?

I've had a similar problem before, but need to know if you have AI showing up at all. ;)
ShaneG_old
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 9700
Joined: Tue Mar 11, 2008 11:52 am

Re: AI Question

Postby Brando14100 » Sat Feb 28, 2009 12:59 pm

Do you ever see AI, only in some places, are there any at gates?

I've had a similar problem before, but need to know if you have AI showing up at all. ;)


Yes they are, but most of the time I don't see any, or very, very few.

8-)
Brando14100
 

Re: AI Question

Postby ShaneG_old » Sat Feb 28, 2009 1:11 pm

I'll assume (yes I know :P) that you've tried moving the traffic sliders up.

Have you downloaded any scenery that came with AI?

I've seen (and had) scenery with AI that was still in FS9 format, and as you know, this will cancel out any FSX traffic files.

I had downloaded every PAI, MAIW, and some WOAI packs and installed them and converted them. But had no traffic, because one of the packs had an additional traffic file in an addon scenery folder.

If you do see some AI, look for ships, if you see none anywhere, with the slider set high, then you more than likely have one of these unconverted traffic files.

Look for what Airlines are showing up and  remove their bgl file and see if you have more or no traffic.

Try testing at Ohare. I always have full gates there with a high traffic setting, and enough international airlines fly there to see if it's a particular file causing this.

Hope I haven't lost you. ;D
ShaneG_old
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 9700
Joined: Tue Mar 11, 2008 11:52 am

Re: AI Question

Postby SubZer0 » Sun Mar 01, 2009 3:59 pm

I see little traffic as well with WoAI and all of the packages installed. My traffic is set at 59% for both Airlines and GA. I'll check O'Hare when I get home from work, after figuring out that 777 VC  ;D
[center][img]http://www.simviation.com/phpupload/uploads/1369006030.jpg[/img][/center]
User avatar
SubZer0
Major
Major
 
Posts: 3722
Joined: Fri May 04, 2007 9:29 pm
Location: KLNA

Re: AI Question

Postby Brando14100 » Sun Mar 01, 2009 9:45 pm

Thank you Shane. I realised that I made a very stupid mistake. I checked my traffic slider, and somehow they were all set to 0%.  :-[ I moved them up, and I've got tons of traffic flying around now.

8-)
Brando14100
 

Re: AI Question

Postby ShaneG_old » Sun Mar 01, 2009 9:59 pm

I just love the easy fixes! ;D ;)

Glad to hear there was no suffering involved on your part. :D
ShaneG_old
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 9700
Joined: Tue Mar 11, 2008 11:52 am

Re: AI Question

Postby Brando14100 » Sun Mar 01, 2009 10:45 pm

;D ;)

Glad to hear there was no suffering involved on your part. :D


Other than feeling stupid. That's not a new feeling though.
Last edited by Brando14100 on Sun Mar 01, 2009 10:45 pm, edited 1 time in total.
Brando14100
 

Re: AI Question

Postby Elroy13 » Wed May 06, 2009 4:05 pm

I have my sliders both almost maxed out. The traffic icon on the desk top is at 100%. I dont see that much traffic either!
User avatar
Elroy13
2nd Lieutenant
2nd Lieutenant
 
Posts: 176
Joined: Wed Mar 04, 2009 10:40 am
Location: KDWH


Return to Adding Aircraft Traffic (AI) & Gates

Who is online

Users browsing this forum: No registered users and 338 guests