Page 1 of 1
My First AI Modification
Posted:
Tue Jan 15, 2008 10:02 pmby Flaps30
I just decided it's time to modify my local airport's (KAVP) parking. Airline traffic parks in the GA area, and nothing parks where it is supposed to. I have AFCAD 2.21 and read most of the manual, but when I click on the green parking discs, I don't know how to specify GA airplanes only. The airline codes seem to be for airlines only. How do I get these parking spots to specify just GA planes only? Thanks. regards, Tom
Re: My First AI Modification
Posted:
Wed Jan 16, 2008 11:04 amby f14driver
If you want to use the parking spots for GA only then you might want to change them to a GA parking spot. When looking at the green discs, select one, right click and select properties, then adjust the parking spot type to parking small or medium GA spots. The parking is dependant on the radius of the aircraft so if you aircraft is for example equipped with a radius of 10 mtrs then the parking spot has to be the same size (actually a 10 m aircraft requires a 10.1 m parking spot)
Re: My First AI Modification
Posted:
Thu Jan 17, 2008 7:55 pmby Flaps30
Thanks f14,
I will give that a try. I didn't know that would do it by itself. I thought it needed a code also. Regards, Tom.