Simviation Forums

I am experienced AFCAD user, and I understand how to open or close rwy's, but don't know how to do this ... I want small A/C to use the shorter rwys instead of lining up with the big guys on larger airports??? (AFCAD.1 AND FS2002)
thanks in advance
papa-metro usaf 1953-57

Hello,

To assign a special runway to a plane (in your case a small plane), there is only one way to do it.
You have to make a second airport (example: KJFK has as second item 2JFK, or for a third 3JFK).
This is explained in the Help/manual for AFCAD.
Have your own Center point and Tower + frequencies, ...
For Flightplans you use then the second airport name and create in TTOOLS Airports also your new second airport.

Sukses. Jos

As with all these things there are some unfortunate drawbacks.

I've created a very small runway at Kai Tak next to the Government Flying Service building and I've got a GFS AI heli landing and taking off there. Works very well indeed.

Trouble is it's a separate scenery which had to have its own ICAO code for TTools. I gave it VHXX. I just did a circuit and approach on the Kai Tak IGS for rwy 13 and after takeoff in an Airbus usually when I contact Hong Kong Approach it says 'Airbus 3 miles south east of Kai Tak'. Now it says '3 miles south east of VHXX'. Also it appears in the 'airports menu' which I didn't really want it to do.

I've got it above Kai Tak in the scenery library and I'm going to try moving it below. Also giving it no name. Hopefully this will do it, but I don't know.


Anyway, it's worthwhile sharing this bit of info with you  ;)

Here's a pic of it in action. The runway is invisible by the way - the lines you can see are main airport taxiway lines