is there any way to....

Adding Aircraft Traffic, airport gates, etc, to your Sim - AFCAD, TTools, Project AI, AI Aircraft, etc

is there any way to....

Postby Daz » Fri May 07, 2004 6:11 pm

is there any way to have aircraft permanantly at the parking or gate ? i mean like so they dont move or anything but fs thinks there AI? i want to cram an apron full of GA aircraft.
AMD athlon XP2800+ @2.34ghz
Epox 8RDA3G 400 fsb, 8x AGP
1024MB DDR400 PC3200
XFX 256MB FX5950 Ultra (oc 525/1.04)
40 gig maxtor 7200rpm
80 gig seagate baracuda 7200rpm
User avatar
Daz
Major
Major
 
Posts: 1163
Joined: Thu Jan 09, 2003 10:03 pm
Location: Leeds, UK

Re: is there any way to....

Postby RollerBall » Fri May 07, 2004 6:31 pm

:)
Yes and No

The only way to do it is to put flight plans in to get them to fly out and back to local (preferably very close) airfields at weird times of the night say when you won't be around. If you put the correct parking codes into the cfg files of the planes you can also have them parked in any gates or parking spots that you want
RollerBall
 

Re: is there any way to....

Postby garymbuska » Sat May 08, 2004 10:05 pm

somone correct if I am wrong but cant you place static aircraft at gates.
Gary M Buska
SYSTEM Specs ASUS P8Z68 V/GEN 3 mother board: INTELL I7 2600k 3.48 ghz Quad core CPU with Sandy bridge: 12 Gigs of 1800hz ram:
GTX 950 OVER CLOCKED: 2 Gigs Ram Windows 10 Home 64 bit Operating system. 750W Dedicated modular power supply. Two Internal 1TB hard drives 1 External 1TB 3.2 USB hard drive. SAITEK Cessna flight Yoke with throttles.
CH Rudder Peddles 27 inch Wide screen Monitor
User avatar
garymbuska
Major
Major
 
Posts: 4415
Joined: Tue Dec 30, 2003 11:10 am
Location: Jacksonville, Florida

Re: is there any way to....

Postby RollerBall » Sun May 09, 2004 2:05 am

cant you place static aircraft at gates.

:)

Hiya Gary. You certainly can, but I think daz wanted something based on AI which can't be static - always has to have a flight plan to and from somewhere.
RollerBall
 

Re: is there any way to....

Postby garymbuska » Sun May 09, 2004 5:45 pm

Hello rollerball I thought so but was not sure. I was not quite sure what he wanted .
By the way what happend to the guy parachuting ? I hope he had a safe landing  8)
Gary M Buska
SYSTEM Specs ASUS P8Z68 V/GEN 3 mother board: INTELL I7 2600k 3.48 ghz Quad core CPU with Sandy bridge: 12 Gigs of 1800hz ram:
GTX 950 OVER CLOCKED: 2 Gigs Ram Windows 10 Home 64 bit Operating system. 750W Dedicated modular power supply. Two Internal 1TB hard drives 1 External 1TB 3.2 USB hard drive. SAITEK Cessna flight Yoke with throttles.
CH Rudder Peddles 27 inch Wide screen Monitor
User avatar
garymbuska
Major
Major
 
Posts: 4415
Joined: Tue Dec 30, 2003 11:10 am
Location: Jacksonville, Florida

Re: is there any way to....

Postby RollerBall » Sun May 09, 2004 6:08 pm

[quote] By the way what happend to the guy parachuting ? I hope he had a safe landing
RollerBall
 

Re: is there any way to....

Postby Daz » Sun May 16, 2004 5:05 pm

cheers guys sorry bout the delay in response i completely forgot about this post..interesting rollerball cheers might try that..

daz
AMD athlon XP2800+ @2.34ghz
Epox 8RDA3G 400 fsb, 8x AGP
1024MB DDR400 PC3200
XFX 256MB FX5950 Ultra (oc 525/1.04)
40 gig maxtor 7200rpm
80 gig seagate baracuda 7200rpm
User avatar
Daz
Major
Major
 
Posts: 1163
Joined: Thu Jan 09, 2003 10:03 pm
Location: Leeds, UK

Re: is there any way to....

Postby stevewilson » Sun May 16, 2004 9:59 pm

Hi All

I have several AI that appear to be static, like Rollerball said, I have them taking off from my airport once a week like at 0400 local and loop around to land right back at my airport.

I never see them leave or return but they are always there. Might have to stay up some night and see what they do.

Steve
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.

Re: is there any way to....

Postby Daz » Fri May 28, 2004 6:41 pm

steve u need to get out more mate lol

only joking  ;D
AMD athlon XP2800+ @2.34ghz
Epox 8RDA3G 400 fsb, 8x AGP
1024MB DDR400 PC3200
XFX 256MB FX5950 Ultra (oc 525/1.04)
40 gig maxtor 7200rpm
80 gig seagate baracuda 7200rpm
User avatar
Daz
Major
Major
 
Posts: 1163
Joined: Thu Jan 09, 2003 10:03 pm
Location: Leeds, UK

Re: is there any way to....

Postby stevewilson » Fri May 28, 2004 6:49 pm

Funny you should say that, as I hear it from the wife all the time. ;D
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.

Re: is there any way to....

Postby garymbuska » Sat May 29, 2004 4:42 pm

Some airports have static aircraft that are not AI aircraft.
These planes are a part of the scenery for that airport and will never move.
Gary M Buska
SYSTEM Specs ASUS P8Z68 V/GEN 3 mother board: INTELL I7 2600k 3.48 ghz Quad core CPU with Sandy bridge: 12 Gigs of 1800hz ram:
GTX 950 OVER CLOCKED: 2 Gigs Ram Windows 10 Home 64 bit Operating system. 750W Dedicated modular power supply. Two Internal 1TB hard drives 1 External 1TB 3.2 USB hard drive. SAITEK Cessna flight Yoke with throttles.
CH Rudder Peddles 27 inch Wide screen Monitor
User avatar
garymbuska
Major
Major
 
Posts: 4415
Joined: Tue Dec 30, 2003 11:10 am
Location: Jacksonville, Florida

Re: is there any way to....

Postby stevewilson » Sat May 29, 2004 6:37 pm

Hay Gary:  Would it be nice if we could in clude those at our airports.

I've greatly reduced the number of static A/Is at my airport as the play havic on FPS

Steve
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.

Re: is there any way to....

Postby martianfrogz » Mon Jun 14, 2004 10:43 pm

You can, but I'm not sure how. They would be static, maybe you could use Gmax, and set the coordinates for the gate you wanted them to park at.
Image
Currently flying around the world! Coming to an airport near you!!!
User avatar
martianfrogz
2nd Lieutenant
2nd Lieutenant
 
Posts: 129
Joined: Sat Jun 05, 2004 12:44 am

Re: is there any way to....

Postby stevewilson » Mon Jun 14, 2004 11:41 pm

Martian and Gary:  I think that the static ac at some airports are those that are in the list of objects that comes with the scenery SDK.  However they will not show up at just any airport, I know I've tried, You can compile them into a bgl file and add it to you local area, but if your area is not where M$ programed it, it will not show up.
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.

Re: is there any way to....

Postby JRoc » Thu Jun 17, 2004 3:27 pm

The easiest way would probably be to just set a route for the 'static' aircraft in question, and have them fly a couple circuits, once a day. They will, for the most part, be static.
JRoc
1st Lieutenant
1st Lieutenant
 
Posts: 401
Joined: Thu Dec 11, 2003 3:41 am
Location: CYVR/CYQR/CYMJ/CYXE (nomad!)


Return to Adding Aircraft Traffic (AI) & Gates

Who is online

Users browsing this forum: No registered users and 145 guests