AI Malcontent DC-10 won't show up
I've been getting pretty good at adding AI traffic, but the AI Malcontent DC-10 is the exception.
Aircraft.cfg has wingspan at 126.46ft (38.55m). Wiki says a DC-10-30 wingspan is 165 ft 4 in / 50.39 m.
AI- Aircraft Editor shows that the parking radius set at 30m. AI Aircraft Radius Table has 39m for a DC-10. Changed parking radius in the AI - Aircraft Editor from 30m to 39m. Checked afcads for 39m parking, changing one parking spot from 38m to 39m. No showing up.
Also checked parking codes and missing alpha channels.
The only thing I haven't tried is kicking the tires
I have the CDAI DC-10-40 (Japan Airlines) and it works fine. Aircraft.cfg wingspan is set at 211ft and under [General] shows atc_type=BOEING
atc_model=B744
Have I missed checking anything else?
Aircraft.cfg has wingspan at 126.46ft (38.55m). Wiki says a DC-10-30 wingspan is 165 ft 4 in / 50.39 m.
AI- Aircraft Editor shows that the parking radius set at 30m. AI Aircraft Radius Table has 39m for a DC-10. Changed parking radius in the AI - Aircraft Editor from 30m to 39m. Checked afcads for 39m parking, changing one parking spot from 38m to 39m. No showing up.
Also checked parking codes and missing alpha channels.
The only thing I haven't tried is kicking the tires
I have the CDAI DC-10-40 (Japan Airlines) and it works fine. Aircraft.cfg wingspan is set at 211ft and under [General] shows atc_type=BOEING
atc_model=B744
Have I missed checking anything else?
