Hi there,
I have added two DC-3 Dakota's as AI Traffic from Liverpool Airport, using the program "Simple AI" and "TTools".
I created a flight for the KLM Dakota I have in FS2004, going to Amsterdam. However when I use Traffic View Board, It says the Aircraft is going to Dublin for some strange reason ? I believe I have the correct Airport coordinates and IATA code i.e. EHAM whereas Dublin Airports is EIDW, here is the text, I got the TTools program to compile the Traffic File i.e. .BGL from the Following 3 Files :-
Airports Text File :- EHAM being Amsterdam or am I wrong ?
74NC,N34* 45.88',W78* 22.36',125
BGBW,N61* 9.32',W45* 25.29',112
BGGH,N64* 11.21',W51* 40.45',282
CYYR,N53* 18.90',W60* 25.52',157
CYYT,N47* 36.87',W52* 45.11',459
EGGP,N53* 19.77',W2* 50.77',79
EGNS,N54* 4.76',W4* 37.25',52
EHAM,N52* 18.47',E4* 45.84',-2
EIDW,N53* 25.04',W6* 16.11',240
KBMI,N40* 28.43',W88* 54.93',869
KCGX,N41* 51.29',W87* 36.47',591
KCLT,N35* 12.60',W80* 56.43',745
KFPK,N42* 34.23',W84* 48.50',889
KIAH,N29* 57.25',W95* 20.36',95
KJFK,N40* 38.28',W73* 46.72',10
KMIA,N25* 47.35',W80* 17.36',7
KOCW,N35* 33.98',W77* 2.74',36
KORD,N41* 58.53',W87* 54.25',666
KSGH,N39* 50.29',W83* 50.29',1050
KSMO,N33* 59.37',W118* 27.00',174
MUHA,N22* 59.10',W82* 24.53',210
PABA,N70* 6.46',W143* 34.77',3
PAED,N61* 15.08',W149* 47.54',210
PAJN,N58* 21.05',W134* 34.56',16
PAKP,N68* 6.44',W151* 44.59',2100
PANC,N61* 10.22',W149* 59.77',151
PANT,N55* 0.97',W131* 34.27',118
VDPP,N11* 32.39',E104* 50.83',39
VEMN,N27* 28.60',E95* 1.06',358
VLVT,N17* 59.08',E102* 33.70',561
VYMK,N25* 23.04',E97* 21.52',472
ZPPP,N24* 59.76',E102* 44.97',6214
Aircraft Text File Info :-
AC#1,120,"Douglas DC-3"
AC#2,120,"Douglas DC-3 Paint1"
AC#3,120,"Douglas DC-3 Paint2"
AC#4,120,"Douglas DC-3 Paint3"
AC#5,120,"Douglas DC-3 Paint4"
AC#6,120,"Douglas DC-3 Paint5"
AC#7,120,"Douglas DC-3 Paint6"
AC#8,120,"Douglas DC-3 Paint7"
AC#9,120,"Douglas DC-3 Paint8"
AC#10,120,"Douglas DC-3 Paint9"
AC#11,120,"Douglas DC-3 Paint10"
AC#12,120,"Douglas DC-3 Paint11"
AC#13,120,"Douglas DC-3 Paint12"
AC#14,120,"Douglas DC-3 Paint13"
AC#15,120,"Douglas DC-3 Paint14"
AC#16,120,"Douglas DC-3 Paint15"
AC#17,120,"Douglas DC-3 Paint16"
AC#18,120,"Douglas DC-3 Paint17"
AC#19,120,"Douglas DC-3 Paint18"
The 2 DC-3 Dakota AI Aircraft have the correct color scheme and writing on them after compiling.
And Here is the Flightplans Text File Info :- I chose EGGP i.e. Liverpool as the start Destination, which shows correctly in Traffic View Board.
AC#9,G-KLM,99%,24Hr,VFR,12:00:00,14:36:15,020,R,1,EHAM,17:00:00,19:36:15,020,R,2,EGGP
AC#10,G-IOM,99%,24Hr,VFR,12:30:00,13:23:43,020,R,2,EGNS,16:30:00,17:23:43,020,R,3,EGGP
Could someone on this forum please help me and tell me, why the Destination for the KLM Dakota is showing as Dublin, when I have chosen EHAM Amsterdam ?
And if there is something wrong with the Info from the text files above, could someone please tell me where I have gone wrong, and what I need to change to have the KLM DC-3 Dakota going to Amsterdam instead of Dublin. The Other DC-3's destination is the Isle of Man (Ronaldsway), which shows correctly in Traffic View Board. Any help and info someone could give me would be much appreciated. Best Regards Eddie Winch