Page 1 of 1
Need Airfield Made
Posted:
Mon May 09, 2011 6:45 pm
by lukerad
Hi
I was wondering if someone could make my AME's Airfield for me.
Location :
Lindsay, Ontario, Canada
N44 32.389
W078 53.438
Airfield Info
Freymond Aviation
Runway 10-28
Re: Need Airfield Made
Posted:
Tue May 10, 2011 4:22 pm
by Strategic Retreat
I do like this kind of projects. Small airports that FS has always ignored... you can count on my small abilities.
As your airport DOES appear on Google Earth, I have only three requests
1) You say the runway is 2000 feet, but Google Earth tells me it is 1884.95 feet, more or less... who's right? You or GE?
2) Do you have the ICAO code for the airport?
3) For what I can see of it, on GE, there isn't a perfectly delineated apron, but more of a big roughy-parallelogram-shaped meadow with the top left corner connected externally to a road and from has the small hangar attached on the same corner on the inside... I wouldn't want my guesses to pollute the end result, so please try and tell me if I got it right, and if I didn't, tell me how it is for real.
The sooner you let me know, the sooner I can lay it down.
PS
Fair warning. ADE9X has practical limits on the kind of 3D objects and MAY not have the correctly sized hangar... I could have to... improvise. I'll let you know along the way.
Re: Need Airfield Made
Posted:
Wed May 11, 2011 2:01 pm
by lukerad
Hello,
My AME says 2000 ft...in reality it is probably slightly less, but for simplicity sake why dont we just stay with 2000ft..prob easier for you i would imagine. And no i dont have the code to be honest, i was thinking we could just make it " CBFA " ( Brian Freymond Aviation ) . As for the apron thats about right...its not really perfectly marked out but i have included a picture now to make it a little easier i hope. Oh and i know there isnt any on in but if you could include cones along the sides of the runway it would be greatly appreciated!
Thank!
lukerad
Re: Need Airfield Made
Posted:
Wed May 11, 2011 3:07 pm
by Strategic Retreat
Ok, everything I needed, I have.
Must warn you, have made a preliminary inspection on the place under FS9, and at the VERY SAME PLACE, half of the runway would be floating on water, so I displaced slightly the referring point so the water will be a little away and not a problem for the airfield.
Sorry, but I'm unable to satisfy your request about the cones... fact is, ADE9X has no cones in it and I am not so deep an expert to know if it is even possible to add it. Will, in exchange, add a simple glideslope light indicator (VASI) that will point the way to the runway, if you re in the right position and simplify landing operations. More, I cannot really do. :-/
Will write more as the project comes along.
Re: Need Airfield Made
Posted:
Fri May 13, 2011 11:15 am
by dave3cu
lukerad,
Looking at your posts here at SimV, I guess you're using FSX?
If that's the case, I've nearly completed an FSX project for Freymond Avation based on your photo and Google Earth.
If you're interested, I've got a couple of questions for you before completing the project. You can respond either here or PM.
Dave
Re: Need Airfield Made
Posted:
Sat May 14, 2011 7:00 pm
by lukerad
Hello Dave,
I am indeed running FSX and am VERY interested in your work. please dont hesitate to contact me if you need any further information!
Thanks!
Lukerad
Re: Need Airfield Made
Posted:
Sat May 14, 2011 7:09 pm
by dave3cu
Lukerad,
I read your pm this morning. Cleaning up a few things in the scenery and then I'll e-mail with the few questions I have.
Dave
Re: Need Airfield Made
Posted:
Sun May 15, 2011 11:54 am
by lukerad
Hey Dave,
Freymond Aviation also deals with float planes and i was wondering if you could park a few static float planes as well. if not thats totally okay, your work has already exceeded my expectations
. Anyway look forward to hearing back and getting my hands on it !
Lukerad
Re: Need Airfield Made
Posted:
Sun May 15, 2011 1:05 pm
by Strategic Retreat
Hello Dave,
I am indeed running FSX and am VERY interested in your work. please dont hesitate to contact me if you need any further information!
Thanks!
Lukerad
You know, I could have done it for FSX, had you corrected my assumptions you had FS9... :-?
...though, I admit, having never been on the grounds of the airfield proper, my work probably would have not compared to Dave's.
Oh well... at least you found someone who had a better idea of how the airfield to make is shaped, it seems. Have fun.
Re: Need Airfield Made
Posted:
Mon May 16, 2011 9:11 pm
by lukerad
Dave,
Hows it coming. Sorry to keep bugging but i am dying to get my hands on it! haha
Thanks!
Lukerad
Re: Need Airfield Made
Posted:
Mon May 16, 2011 10:35 pm
by dave3cu
I got delayed today but should ship sometime tomorrow afternoon..
Re: Need Airfield Made
Posted:
Wed Aug 17, 2011 6:11 am
by Raoul98
Hy Every body Can Somebody Make Me Better Karpathos Airport Scenery and Airport. Please Help Me.