Print view
Board index ‹ Design Forums ‹ Scenery & Panel Design

Lost Gauges

FSSC, Airport 2.*, CfgEdit, etc. Get to grips with designing Scenery & Panels here!
Post a reply

Lost Gauges

Postby Capt._Viper » Sun Feb 27, 2011 8:34 pm

I have had the gauges in the default Baron 58 (FS9)disappear from the panels, both 2d and VC as well.   The cabinette is still in place and have back copied it to the panel file.
Any ideas?   
User avatar
Capt._Viper
2nd Lieutenant
2nd Lieutenant
 
Posts: 161
Joined: Sat Jul 30, 2005 11:04 pm
Location: NC, United States
Top

Re: Lost Gauges

Postby dave3cu » Sun Feb 27, 2011 9:22 pm

Does the 2d panel .bmp still show?

In any case, check to see if the panel.cfg is still intact.
At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation.
dave3cu
Major
Major
 
Posts: 3141
Joined: Sun May 19, 2002 9:55 am
Location: 3CU, Northern Wisconsin, USA
Top

Re: Lost Gauges

Postby Capt._Viper » Mon Feb 28, 2011 8:05 am

Panels show up in both cases, just no gauges.
User avatar
Capt._Viper
2nd Lieutenant
2nd Lieutenant
 
Posts: 161
Joined: Sat Jul 30, 2005 11:04 pm
Location: NC, United States
Top

Re: Lost Gauges

Postby Hagar » Mon Feb 28, 2011 11:04 am

[quote]I have had the gauges in the default Baron 58 (FS9)disappear from the panels, both 2d and VC as well.
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Google Photos albums
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 30864
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica
Top

Re: Lost Gauges

Postby Capt._Viper » Mon Feb 28, 2011 3:57 pm

Okay, I found and reinstalled the beech_baron.cab...now can you tell me where the cpt.x.cabs' are at?
After the restart, I found some switches or rocker switches still
Last edited by Capt._Viper on Mon Feb 28, 2011 3:58 pm, edited 1 time in total.
User avatar
Capt._Viper
2nd Lieutenant
2nd Lieutenant
 
Posts: 161
Joined: Sat Jul 30, 2005 11:04 pm
Location: NC, United States
Top

Re: Lost Gauges

Postby dave3cu » Mon Feb 28, 2011 5:05 pm

There are no default files by that name (or name form) in FS9. They must have come from an add-on aircraft or panel.

Are those gauge names being used in your FS9 default Baron panel.cfg?
Last edited by dave3cu on Mon Feb 28, 2011 5:10 pm, edited 1 time in total.
At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation.
dave3cu
Major
Major
 
Posts: 3141
Joined: Sun May 19, 2002 9:55 am
Location: 3CU, Northern Wisconsin, USA
Top

Re: Lost Gauges

Postby Capt._Viper » Mon Feb 28, 2011 7:00 pm

No, these are in the fs9 gauge folder and it seems that they are installed with the rest of the sim.
User avatar
Capt._Viper
2nd Lieutenant
2nd Lieutenant
 
Posts: 161
Joined: Sat Jul 30, 2005 11:04 pm
Location: NC, United States
Top

Re: Lost Gauges

Postby Hagar » Mon Feb 28, 2011 7:31 pm

Dave is correct. The cpt gauges are not default. Can you paste a copy of your Baron Panel.cfg here.

Edit: I think the file you're looking for is posted here. http://simviation.com/1/search?submit=1&keywords=fpem1201.zip&categoryId=
Click on the 'Toggles for FS2004 Embraer 120' link. It includes cpt.toggles.king.CAB
Last edited by Hagar on Mon Feb 28, 2011 7:51 pm, edited 1 time in total.
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Google Photos albums
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 30864
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica
Top

Re: Lost Gauges

Postby CaptJon1979 » Mon Apr 25, 2011 3:56 pm

I've had the same problem found out some of the guages were replaced when i installed several new AC. I found all FS9 default AC were missing gauges or switches so i did a fresh reinstall and didn't overwrite the files this time.
Image
User avatar
CaptJon1979
Ground hog
Ground hog
 
Posts: 25
Joined: Fri Jul 17, 2009 11:46 pm
Location: KNHK or KADW
Top

Re: Lost Gauges

Postby mr357magnum » Tue Apr 26, 2011 6:37 am

I recently had to replace my video card in my Windows XP Computer. Now when I fly CFS 2 and try to go to the VC of add on planes, the gauges no longer show up but they do show when I go to the VC panel of the Default planes.
Can anyone tell me a fix for this? I have completely uninstalled CFS 2 and then reinstalled it and just added one add on plane to try and it had the same result.
I went from an Nvida 7600 to an Nvidia 9500 using a PCIe slot.

Thanks
mr357magnum
Ground hog
Ground hog
 
Posts: 1
Joined: Tue Apr 26, 2011 7:18 am
Location: Florida
Top
Post a reply

Return to Scenery & Panel Design

Who is online

Users browsing this forum: No registered users and 554 guests