Page 1 of 1
Two Altimeters?
Posted:
Sat Nov 25, 2006 7:04 pmby dir
Hi,
Is it possible to have two altimeters display in the same panel?
Would they have to be from the same source, or could they be (ideally) separately fed (to simulate real world)?
dir.
Re: Two Altimeters?
Posted:
Sun Nov 26, 2006 4:58 amby ozzy72
It is possible. The only way you'd be able to get them to give seperate readings is if one is a standard altimeter and the other was a radar altimeter giving you height above the terrain rather than altitude.
Re: Two Altimeters?
Posted:
Sun Nov 26, 2006 8:06 amby dir
I have tried adding a new gauge line in the panel.cfg, using both the existing altimeter and a different one, but the gauge doesn't show up.
As you say "It is possible." could you elaborate please?
dir.
Re: Two Altimeters?
Posted:
Sun Nov 26, 2006 8:09 amby Hagar
If you want 2 or more of the same gauge on a panel first take a copy of the gauge & rename it. Then use the renamed gauge for the duplicate. Repeat this as much as you like.
Re: Two Altimeters?
Posted:
Sun Nov 26, 2006 9:19 amby dir
Ah, ok that makes sense I'll try that... thks.
I really wanted the alts to be different though... is there any reason that can't work?
I've tried before, but maybe I've made a silly error somewhere, I'll have another go...
dir.
Re: Two Altimeters?
Posted:
Sun Nov 26, 2006 9:32 amby Hagar
No reason you can't use two completely different altimeter gauges if you wish. I suspect they will both read ths same though.
Re: Two Altimeters?
Posted:
Sun Nov 26, 2006 12:11 pmby dir
After a re-look, I realised I had the wrong syntax
Good idea to rename the gauges, saving confusion.
I had forgotten also that my panel had a floating radio stack, so my missing gauges were simply hidden ::)
Ta for ya help guys,
dir.
Re: Two Altimeters?
Posted:
Sun Nov 26, 2006 3:37 pmby Gypsy_Baron
After a re-look, I realised I had the wrong syntax
Good idea to rename the gauges, saving confusion.
I had forgotten also that my panel had a floating radio stack, so my missing gauges were simply hidden ::)
Ta for ya help guys,
dir.
Also, check one of the default FSX aircraft.cfg files.
You'll see a new specification there that allows for independantly
operated altimeters. There's also mention of this in the SDK.
[altimeters]
altimeter.0=1
altimeter.1=1
Paul
Re: Two Altimeters?
Posted:
Sun Nov 26, 2006 5:51 pmby Hagar
Also, check one of the default FSX aircraft.cfg files.
You'll see a new specification there that allows for independantly operated altimeters. There's also mention of this in the SDK.
Interesting but I think this is for FS9.