Kodiak CGAS Update

FSSC, Airport 2.*, CfgEdit, etc. Get to grips with designing Scenery & Panels here!

Kodiak CGAS Update

Postby CHUCK79 » Sat Apr 06, 2013 1:52 am

I know it doesn't look like much progress, but I've done a lot of work with the water masks and blend masks
as well as terrain polys for elevation adjustment and shoreline reshaping.
Here's some shots of what I had to work with:
Ultimate Alaska....
https://www.simviation.com/phpupload/upl ... 240864.jpg

https://www.simviation.com/phpupload/upl ... 287359.jpg

Surprisingly, default MS FSX did a better job, but still not really acceptable....
https://www.simviation.com/phpupload/upl ... 248531.jpg

https://www.simviation.com/phpupload/upl ... 294579.jpg

Here's a real world image (although it appears to be old):
https://www.simviation.com/phpupload/upl ... 259181.jpg

This scenery will be compatible with Ultimate AK and default scenery. No patches needed
this time.....I found the gremlin that was causing my compatibility issues (operator error) :shhh:

The ground textures are lower res than my other sceneries, but I used the best freely available imagery
I could :oops:
Image


Image


Image


Image


Image


Image

I know I said before that I was almost ready to start modeling buildings, but I wanted to go back and get
all the terrain and water done and behind me so that I don't have to dread doing it later. A few minor things to do
and then on to hangars/buildings....this one is pretty expansive since the airfield is used by several agencies.
Should be fun 8)

I'm still working on Fairchild.......nearly done....haven't forgotten the tanker guys ;)

Thanks 4 looking :D
User avatar
CHUCK79
Global Moderator
Global Moderator
 
Posts: 6146
Joined: Fri Mar 26, 2010 10:13 am
Location: KOMK

Re: Kodiak CGAS Update

Postby USCG76 » Sat Apr 06, 2013 2:21 am

Hehe, not surprised by the lack of RW pics of Kodiak CGAS. Not much time to have fun there. http://www.flickr.com/photos/coast_guard/8427301561/
I did try to E-mail a friend of mine who is stationed at Kodiak. He responded short, I got sent to Casco Cove Attu CGAS in BFE Alaska :shock: :lol: Nuff said, see ya in 1 year at Corpus Christi TX CGAS. My guess is he self volunteered, I wouldn't lol.
User avatar
USCG76
Ground hog
Ground hog
 
Posts: 25
Joined: Thu Dec 23, 2010 4:05 am
Location: Corpus Christi CGAS/JBSA DET

Re: Kodiak CGAS Update

Postby CHUCK79 » Sat Apr 06, 2013 11:16 am

USCG76 wrote:Hehe, not surprised by the lack of RW pics of Kodiak CGAS. Not much time to have fun there. http://www.flickr.com/photos/coast_guard/8427301561/
I did try to E-mail a friend of mine who is stationed at Kodiak. He responded short, I got sent to Casco Cove Attu CGAS in BFE Alaska :shock: :lol: Nuff said, see ya in 1 year at Corpus Christi TX CGAS. My guess is he self volunteered, I wouldn't lol.



Thanks for the pic O0

I've got the entire weekend free to work on Kodiak :dance: :dance: :dance: :dance:
User avatar
CHUCK79
Global Moderator
Global Moderator
 
Posts: 6146
Joined: Fri Mar 26, 2010 10:13 am
Location: KOMK

Re: Kodiak CGAS Update

Postby USCG76 » Sat Apr 06, 2013 2:26 pm

Well Im free this weekend and am finding more sources for you.
https://www.facebook.com/uscoastguardbasekodiak
They eat better up there and I'm stuck down here eating AF chow Yuck.
Also search term USCG Kodiak Alaska in google images yields some nice also.
User avatar
USCG76
Ground hog
Ground hog
 
Posts: 25
Joined: Thu Dec 23, 2010 4:05 am
Location: Corpus Christi CGAS/JBSA DET

Re: Kodiak CGAS Update

Postby CHUCK79 » Sat Apr 06, 2013 8:30 pm

USCG76 wrote:Well Im free this weekend and am finding more sources for you.
https://www.facebook.com/uscoastguardbasekodiak
They eat better up there and I'm stuck down here eating AF chow Yuck.
Also search term USCG Kodiak Alaska in google images yields some nice also.



Thanks a ton :dance:

Here's some shots of some progress on the first hangar:
https://www.simviation.com/phpupload/upl ... 304278.jpg

https://www.simviation.com/phpupload/upl ... 351080.jpg

https://www.simviation.com/phpupload/upl ... 342029.jpg

https://www.simviation.com/phpupload/upl ... 366903.jpg

I should be sendin' something your way soon ;)
User avatar
CHUCK79
Global Moderator
Global Moderator
 
Posts: 6146
Joined: Fri Mar 26, 2010 10:13 am
Location: KOMK



Re: Kodiak CGAS Update

Postby USCG76 » Tue Apr 09, 2013 11:22 pm

Some serious detail going on in the hanger :o :D
User avatar
USCG76
Ground hog
Ground hog
 
Posts: 25
Joined: Thu Dec 23, 2010 4:05 am
Location: Corpus Christi CGAS/JBSA DET

Re: Kodiak CGAS Update

Postby CHUCK79 » Wed Apr 10, 2013 3:24 pm

USCG76 wrote:Some serious detail going on in the hanger :o :D



I don't know if there's actually a gantry crane in that hangar, but it's my best guess as to what the two humps in the roof must be for......extra structure for a crane?

You don't happen to remember do you? Regardless the crane is staying so I guess it doesn't really matter :lol:
User avatar
CHUCK79
Global Moderator
Global Moderator
 
Posts: 6146
Joined: Fri Mar 26, 2010 10:13 am
Location: KOMK

Re: Kodiak CGAS Update

Postby CHUCK79 » Sat Apr 13, 2013 5:00 pm

@USCG76....check your PMs. I've sent you a link ;)

Only a few buildings done, but I'd like you to test out the terrain modifications to make sure they look correct on your set up.
Do you use Ultimate Alaska, an add on terrain mesh or just default Alaska scenery?

https://www.simviation.com/phpupload/upl ... 914162.jpg

https://www.simviation.com/phpupload/upl ... 980542.jpg

https://www.simviation.com/phpupload/upl ... 980240.jpg

https://www.simviation.com/phpupload/upl ... 971345.jpg

https://www.simviation.com/phpupload/upl ... 972536.jpg
User avatar
CHUCK79
Global Moderator
Global Moderator
 
Posts: 6146
Joined: Fri Mar 26, 2010 10:13 am
Location: KOMK

Re: Kodiak CGAS Update

Postby USCG76 » Sat Apr 13, 2013 9:14 pm

PM received. The only thing at Kodiak is default with SAK over yonder lol.
User avatar
USCG76
Ground hog
Ground hog
 
Posts: 25
Joined: Thu Dec 23, 2010 4:05 am
Location: Corpus Christi CGAS/JBSA DET

Re: Kodiak CGAS Update

Postby Stellicopter » Mon May 27, 2013 9:34 pm

Hey Chuck, sorry to get back to you so late as I'm just now finding out all what has been going on with Kodiak. All I can say HOLY SNAP, WOW! I never thought a mere suggestion on a forum would have turned into so much work for such an amazing project, and I'm eternally thankful for your dedication so many others can enjoy some of this awesome freeware. As I mentioned before how much I'm enjoying KNOW, I cannot wait to see all what you have in store for Kodiak and other projects. Thanks again for all the effort as we, the users owe guys like you everything for keeping this community going and growing.

And a big shout out and THANKS to all those on this forum who have and are serving. This Memorial Day is about the real heroes. It is about YOU!
Stellicopter
Ground hog
Ground hog
 
Posts: 2
Joined: Mon May 27, 2013 9:22 pm
Location: US Gulf Coast

Re: Kodiak CGAS Update

Postby CHUCK79 » Tue May 28, 2013 12:32 am

Stellicopter wrote:Hey Chuck, sorry to get back to you so late as I'm just now finding out all what has been going on with Kodiak. All I can say HOLY SNAP, WOW! I never thought a mere suggestion on a forum would have turned into so much work for such an amazing project, and I'm eternally thankful for your dedication so many others can enjoy some of this awesome freeware. As I mentioned before how much I'm enjoying KNOW, I cannot wait to see all what you have in store for Kodiak and other projects. Thanks again for all the effort as we, the users owe guys like you everything for keeping this community going and growing.

And a big shout out and THANKS to all those on this forum who have and are serving. This Memorial Day is about the real heroes. It is about YOU!



I've stalled out a bit due to work and other distractions.......when I get some time I'll get back on it. I really appreciate the kind words O0
User avatar
CHUCK79
Global Moderator
Global Moderator
 
Posts: 6146
Joined: Fri Mar 26, 2010 10:13 am
Location: KOMK

Re: Kodiak CGAS Update

Postby Stellicopter » Tue May 28, 2013 12:35 am

No prob, no rush from me. I've been ridiculously busy myself.
Stellicopter
Ground hog
Ground hog
 
Posts: 2
Joined: Mon May 27, 2013 9:22 pm
Location: US Gulf Coast


Return to Scenery & Panel Design

Who is online

Users browsing this forum: No registered users and 110 guests