Page 4 of 7

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Wed Jan 25, 2012 4:42 pm
by alrot
from what i can see its pretty decent exept the autopilot and the gauges themselves,their layout seems fine.

edit:
i found this...
http://i.pbase.com/g6/04/645104/2/75810946.omngRIi7.jpg
http://www.aircraft.5u.com/images/7384.jpg

so its ONLY the autopilot section realy...
i think it depends on what is used by the customer. ;)


you have no idea how good it would be if You'd found a real life similar panel..it'd REALLY help me  ,I would have to modified the gauge, and that gauge xml is the type coded in a strange different language that is hard for me to figure it out ,so I would have to write a new entire gauge [smiley=undecided.gif] gauge and I really don't want to do that  ,I can't see the links jetpro ,One said Forbither and the other said was removed  :-?

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Wed Jan 25, 2012 5:03 pm
by jetprop
from what i can see its pretty decent exept the autopilot and the gauges themselves,their layout seems fine.

edit:
i found this...
http://i.pbase.com/g6/04/645104/2/75810946.omngRIi7.jpg
http://www.aircraft.5u.com/images/7384.jpg

so its ONLY the autopilot section realy...
i think it depends on what is used by the customer. ;)


you have no idea how good it would be if You'd found a real life similar panel..it'd REALLY help me

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Wed Jan 25, 2012 5:15 pm
by alrot
:)thank you jetpro!

this one is more similar to the one in FSX

please see your PM  ;)

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Wed Jan 25, 2012 5:18 pm
by jetprop
[quote]


:)thank you jetpro!

this one is more similar to the one in FSX

please see your PM

I'm going to need help with the GPWS

PostPosted: Fri Jan 27, 2012 7:40 am
by alrot
I have try one from simv's library, its made for fs2004 ad it doesn't work for me
all the videos on youtube of my md-83 has it ,even some of the citation x has it ,every one set up this Ground Proximity Warning System and I don't now where and which version they're using  :-[

Alex

Re: I'm going to need help with the GPWS

PostPosted: Fri Jan 27, 2012 9:59 am
by jetprop
[quote]

I have try one from simv's library, its made for fs2004 ad it doesn't work for me
all the videos on youtube of my md-83 has it ,even some of the citation x has it ,every one set up this Ground Proximity Warning System and I don't now where and which version they're using

Re: I'm going to need help with the GPWS

PostPosted: Fri Jan 27, 2012 10:27 am
by hyperpep111
[quote][quote]

I have try one from simv's library, its made for fs2004 ad it doesn't work for me
all the videos on youtube of my md-83 has it ,even some of the citation x has it ,every one set up this Ground Proximity Warning System and I don't now where and which version they're using

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Fri Jan 27, 2012 12:17 pm
by alrot

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Mon Jan 30, 2012 9:22 am
by alrot
The New Upgraded FSX 737-800 its finish ,I will be "Upgraded FSX 737-800"

  I don't know what else to add  :-/

I'm now trying to use and auto Installation compiler (ClickTeam Pro) ,looking a way to this software back up the original files in a single extra folder ,I need to back up the originals B737_800_interior.MDL, panel, texture folder ,aircraft.cfg etc

why auto Install ? because I know how people are ,if they had trouble placing a folder (FSND-MD-83, or Citation x  )in a stupid folder SimObjects\Airplanes\
I can't imagine how would be to place things in main sound folder ,main gauge folder and backing up the files ,

the original files has to be saved

any ideas would be appreciated

Alex

 

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Tue Jan 31, 2012 7:05 am
by Daube
I'm lacking a little bit of free time on my side to test your B737 cockpit further.
If the roads here don't get blocked by the snow tonight, I'll try to get home soon enough to finish the tests. I'm mainly concerned about the electric systems, as I told you already.
It's nothing much though, I just want to verify a thing or two and provide my final feedback.

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Tue Jan 31, 2012 2:00 pm
by alrot
but hey!!!! :o that version you have is obsolete now

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Tue Jan 31, 2012 2:19 pm
by pete
Hey Alex

I don't think you can provide an installer that will do all this

I think you have to TELL people to backup the original 737 interior model (or provide it inside the file) and also TELL people any other files to backup.

Then I think you may be able to provide the installer but I suspect it is complicated to install into many directories --BUT ...  it may be better to simply provide install instructions for manual install. It is not that complicated. (self install is great when it works but can this be done?)

I don't think anyone will really want the originals after your upgrade. You are only adding things - not taking anything away .. :) ... but nio big deal if they do -- we can always provide backups here if they want them  ...

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Tue Jan 31, 2012 4:49 pm
by alrot
[quote]Hey Alex

I don't think you can provide an installer that will do all this

I think you have to TELL people to backup the original 737 interior model (or provide it inside the file) and also TELL people any other files to backup.

Then I think you may be able to provide the installer but I suspect it is complicated to install into many directories --BUT ...

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Tue Jan 31, 2012 5:17 pm
by Hagar
[quote]I'm still studying the Clickteam software if it doesn't do what I want ,Ill have no choice will be manually

Re: If you'd have a chance to replicate and add things to the VC of the 737-800?

PostPosted: Wed Feb 01, 2012 5:09 pm
by BrandonF
It depends on the size of the originals I guess, but maybe you could have a "restore default" exe that reinstalls the default 737 cockpit files?