Simviation Forums

Hi Guys!
I am making a rocket and I need it to stand up.
In the model I did it horizontally, I just edited the contact points and static pitch.
I have 5 points (0,1,2,3,4) on the bottom, making a cross, and 1 (5) at the tip on the top.
But for some reason it just keeps sink through the ground. :-?

[contact_points]
static_pitch = 90
static_cg_height = 90
max_number_of_points = 6

point.0 = 1, -90.4046, 0.002, -40.4555, 3000, 0, 5, 0, 3, 2.5, 0.5, 0, 0, 4, 400, 400
point.1 = 1, -90.0678, 0, -0.0006, 3000, 0, 5, 0, 3, 2.5, 0.5, 0, 0, 4, 0, 400
point.2 = 1, -90.3684, 0, 39.5385, 3000, 0, 5, 0, 3, 2.5, 0.5, 0, 0, 4, 0, 400
point.3 = 1, -90.0466, 40.0349, 0.0017, 3000, 0, 5, 0, 3, 2.5, 0.5, 0, 0, 4, 0, 400
point.4 = 1, -90.023, -39.7332, -0.2725, 3000, 0, 5, 0, 3, 2.5, 0.5, 0, 0, 4, 0, 400
point.5 = 1, 131.9768, 0, -0.0166, 500, 0, 5, 0, 0, 0, 0, 0, 0, 9, 0, 400


Any suggestions?
[smiley=dankk2.gif]

is it sinking through the ground directly after loading, or not. Why i am asking is I had a similar problem, and mine only sink into the ground directly after loading, then it corrected itself. The problem was the static height .

Thx for the reply.
It sinks directly after loading and goes crazy (I had crash turned off).
Anyway, I found a alternative to that.

What was you're alternative??