Simviation Forums

Turns out I was watching another model of the citation "Caliber" and when I realize It was far away from the REAL Citation Sovereign shape, I did have to start all over again the whole model the other mesh couldn't be repair..



this is not an easy belly as It looks watch How from a rounded belly foes to square (I hate these shapes) its like the CitX ,

I'm using hundreds of shots from Airliners.net

I took borrow the landing gear of the CitX ,But I just realize Is quite different ,Even up the tires are so different

I can't wait. It's looking good so far.

8-)

I pleasantly surprised to see you have the fortitude to restart the entire project when you had gotten so far with the other mesh.  Normally, when I see such a fundamental flaw that far into the designing process, I get fairly discouraged and set the project aside.  My "hangar" is filled with such projects, some of them close on to six years old at this point!

Onward and upward, eh? 8-)

Here is a side window and closeup of the decal on the left side just aft of the pax door:



Check out the belly fairing in this one:



This will show a hi-res closeup of the extended gear with a/c in landing configuration...

http://www.airliners.net/photo/Cessna-6 ... e069fd1db5

Certainly seems like simple gear for such a large aircraft . . .

Looks good, however it looks like someone else is also working on one lol.

http://www.aerodynamika.com/cgi-bin/yabb/YaBB.cgi?num=1239042643

Everyone's building Citations these days.  Wonder what got everyone in such a rush? :-?

Looks good, however it looks like someone else is also working on one lol.

http://www.aerodynamika.com/cgi-bin/yabb/YaBB.cgi?num=1239042643

They made excellent models , But without VC ,and is not every one is Alex Guedez from, Brazil ,he got a better skills in 3d max than me.
But I'm more experience in FSX-SDK than him,I have his two recent releases The Xml Ecel very good ,But no VC

I'm not running, this is not a competition, I wish I could meet this guy and made something good from the good of each both of us

Looking good Alex! 8-)

Looks good, however it looks like someone else is also working on one lol.
http://www.aerodynamika.com/cgi-bin/yabb/YaBB.cgi?num=1239042643

What is the one with the swept forward wings?

Looking good Alex! 8-)

Looks good, however it looks like someone else is also working on one lol.
http://www.aerodynamika.com/cgi-bin/yabb/YaBB.cgi?num=1239042643

What is the one with the swept forward wings?

They aren't swept: they're straight.  The taper on the front is just more pronounced at the root than the trailing edge taper.

definally correct also and as far as I know this Model doesn't have lead edge or front flaps :-/

[quote]They aren't swept: they're straight.

I'll just wait for Alrot's version.

there  shouldn't be versions, the model is a real life model ,it should be in appearance similar to a real life  Citation Sovereign  :-/

I'll just wait for Alrot's version.

there