Page 1 of 2

exist any CAD converter to fsds/gmax??

PostPosted: Thu Jun 01, 2006 9:13 pm
by Berserk
Hi all

I'm working on my thesis and as all you must guess i have to make the plane following the FAR rules.

I have Solid Edge V16 and FSDS3, i want to know if exist any converter who can change the

*.par, *.asm   specially, to fsds/gmax or the

*.iges, *.igs, *.jt, *.sat, *.step, *.stp, *.x_b, *.x_t, *.xgl, *.plmxml, *.ems, *.stl

Thanks in advance

Berserk

Re: exist any CAD converter to fsds/gmax??

PostPosted: Thu Jun 01, 2006 10:42 pm
by Travis
Well, you could try some of these converters:

http://www.davidhsmith.net/Essential_Tools.htm

Or perhaps:

http://gameart.jaquays.com/model_resources.html

I have no idea if any of these will be usefull, as I don't have the foggiest idea what you're actually trying to do, but I know that the converters on the first page have helped me imensely.  I have used one of them to go from FSDS to Gmax on occasion (can't remember which one, exactly).

Re: exist any CAD converter to fsds/gmax??

PostPosted: Sat Jun 03, 2006 8:43 pm
by Berserk
thanks for trying, however the program doesn't export to any extension that the CAD recognize  :'(  :'( :'( :'(

Thanks

Berserk

Re: exist any CAD converter to fsds/gmax??

PostPosted: Sun Jun 04, 2006 10:11 am
by Felix/FFDS
Does the program export to DXF?  If so, export the mesh to dxf and import directly into gmax, or import into FSDS through the CVA converter.

Re: exist any CAD converter to fsds/gmax??

PostPosted: Wed Jun 07, 2006 4:43 am
by -sam-
You should never use CAD geometry for realtime models !!!!!!
It produces waaaay to much unnecessary geometry that
is nearly impossible to reduce afterwards. I could list dozens of reasons not to us CAD Data.
Especially iges/step are actually NURBS formats.. wich makes it even more complicated. The only tool I know that converts iges in an acceptable way into max is PowerNURBS. But this is a plugin for max.. and probabely won

Re: exist any CAD converter to fsds/gmax??

PostPosted: Fri Jun 09, 2006 8:16 pm
by Berserk
The program export to dxf but i dont know why cva dont read it  ??? i guess that i have to made the model in both programs

:'( :'(

sam, thanks for the advice but i have to make the plane in solid edge 'cause is the CAD of the university and i have to make a model in it  :'( i have CATIA but they say no, solid edge

Regards

Berserk

Re: exist any CAD converter to fsds/gmax??

PostPosted: Fri Jun 09, 2006 9:24 pm
by Felix/FFDS
[quote]The program export to dxf but i dont know why cva dont read it

Re: exist any CAD converter to fsds/gmax??

PostPosted: Tue Jun 27, 2006 6:10 pm
by Berserk
Felix existe algun otro conversor de dxf a fsds??

estuve revisando Freeflight design, y vi un programa de Finn Newick, pero el link esta caido tonces no se ni que programa era ni como se llamaba  ???

Exhist any other conversor since DXF to FSDS?? i dont know why but mine dont work any more  :'( :'( :'( :'( :'(

Re: exist any CAD converter to fsds/gmax??

PostPosted: Wed Jun 28, 2006 7:18 am
by Felix/FFDS
[quote]Felix existe algun otro conversor de dxf a fsds??

estuve revisando Freeflight design, y vi un programa de Finn Newick, pero el link esta caido tonces no se ni que programa era ni como se llamaba

Re: exist any CAD converter to fsds/gmax??

PostPosted: Thu Jul 27, 2006 11:02 pm
by Berserk
Felix existe algun conversor de dxf a gmax sin que sea un plugin para gmax?? Es que tengo un nuevo programa 3D excelente pero de fsds a blender el unico modo es pasarlo a dxf con CVA_Converter, pero muchas veces no me deja hacer el cambio, y el detalle es que blender si acepta casi todos los formatos de 3d, entre ellos 3d studio max, entonces como puedo hacer???

Felix exist any converter since dxt to gmax??? an external program than dont need gmax, i found a new 3D program with which i can make a lot of things easier than with just fsds, but i need a converter since fsds to it, it accept almost all the 3D program

Re: exist any CAD converter to fsds/gmax??

PostPosted: Fri Jul 28, 2006 6:24 am
by Felix/FFDS
#1 - gmax (1.2) can import dxf and 3DS files directly.

#2 - gmax is in your FS2004 disc 1 "Extras" folder

Check the Simviation utilities for the gmax registration workaraound.  I'm surprised to read that gmax isn't available since I checked turbosquid and they still have it.

Remember turbosquid (http://www.turbosquid.com/gmax) is the official gmax support page.  Once discreeet decided not to support it further, support for gmax got transferred to turbosquid

Re: exist any CAD converter to fsds/gmax??

PostPosted: Fri Jul 28, 2006 10:55 am
by Berserk
thanks felix but please told me, how you export since gmax to fsds, do you have to export to dxf and since it to fsc with CVA_Converter, or exist any way to export direct since gmax to fsds??

thanks

Re: exist any CAD converter to fsds/gmax??

PostPosted: Fri Jul 28, 2006 5:30 pm
by Felix/FFDS
thanks felix but please told me, how you export since gmax to fsds, do you have to export to dxf and since it to fsc with CVA_Converter, or exist any way to export direct since gmax to fsds??

thanks


You have to install a gmax to quake md3 exporter, convert the md3 to dxf with a converter suich as deep Exploration and import with the CVA converter into fsds.

Re: exist any CAD converter to fsds/gmax??

PostPosted: Tue Aug 08, 2006 10:20 am
by Fitter
I'm not too sure but try deep exploartion.
A Right Emisphere product.

Re: exist any CAD converter to fsds/gmax??

PostPosted: Sun Aug 13, 2006 11:10 pm
by AuMaV
Hi
You could also try this http://www.quick3d.com/
Ive used it in the past and it works pretty well
even though t says its time limited Ive had it installed for about a year now and bar the Nag sreen still works
wozza