Gear Problem.

[Greg Ebnit EApilot]

Anyone tell me why my landing gear is bouncing wildly. I have the aircraft below the grid in gmax 18.0 feet and my contact points set at a corresponding hieght of -18.1. There is at least 3 feet of travel on the nose gear and 2 feet on the main gear (compression 100-150-200). They were working fine but I had to make an adjustment to the fuselage because I built it with the nose slightly lower for a sloping pitch. At the time I did'nt realize I could control that in the CFG and Airfile. So when I raised the nose back to 0.0 it made everything unstable. What am I missing? Do I need to relink /reanimate/move the gear. Thanks Greg.

[Milton]

Maybe this will help:
http://www.sim-outhouse.com/sohforums/s ... hp?t=13564

For a fully loaded aircraft,

[Greg Ebnit EApilot]

Thanks Milton I'll try that out.

[Greg Ebnit EApilot]

THAT WAS IT!  8) Thanks a whole lot for the 40%nose gear and 70% main gear tip Milton. I just needed the mathmatical formula. Math is not one of my  stronger points. Now I'm ready for final flight testing and I can finaly get my Sim reference point where I need it in Gmax. Thanks to everyone who helped me get wheels up on my first aircraft. Greg. (JPG. of EA-Super600X-2 stable on the threshold )