voltage tweaks

[michaelmichael]

my specs
windows xp service pack 2
E6600 cpu
RAM corsair ddr2 667mhz 4 gigs
2western digital HD raided 500gigs
ATI Radeon X1900 512 mb DDR3 clock500 memory 594
MOBO D975BX version 305

Here are my questions:

1.what is the default speed/voltage for the ati card and how high will it /can it be adjusted?
2. what is the default voltage of the corsair RAM and how high can it be volt modded?
3. what is the optimum timing of the RAM. currently ras 12
                                                                          cl   4
                                                                          rcd 4  
                                                                          rp   4.
4. what is the default setting for the FSB


I have the Intel desktop Control Centre  and the above items can be configured through the CC.
A. The VID card can be adjusted from 101.32mzh to 109.24 mzh
B. The RAM can be adjusted from 1.8 to 2.2 volts and the timings Ras 15 to 4 all other between 3 to 5
C. The FSB can be increased by % of 1% to 50% increase . It can also be decreased by percentages -1% to _20%

needless tyo say all of these settings should be balance to give optimum performance.

your thoughts on the above are greatly appreciated.

thanks

michaelmichael